The T80 By HCigar Previewed
The HCigar T80 is a new mod belonging to the HCigar Towis range – which includes the Towis T180.
The T80 is a small single 18650 battery mod (battery not included) which is designed to sit nicely in the hand.
This will output up to 80W using the Towis XT80 chip.
The screen is an 0.96in high definition colour TFT screen which on the images looks really bright and clear.
The fire button is mounted on the curved top part of the mod and a stainless steel 510 connector which promises to accommodate larger tanks sits on top of the mod. The specs say this is 28.5 mm in width so in theory a 28mm diameter tank should fit on this ok.
A whole host of protections are present to help to keep you safe including Battery Reverse Polarity Protection, Battery Low Voltage Protection, Battery Overcharge Protection, Battery Voltage Discharge Protection etc.
The mod will automatically power itself off in an hour but you can press any key to wake it back up again.
There are two colour variants to choose from – Black and Silver.
- HCigar T80 mod
- USB Cable
HCigar T80 Mod Specs
- Size: 43×28.5x88mm
- Output Wattage: 5W-80W
- Body Weight: 138g
- Max output voltage: 8.5
- USB Charging: 5V
- Material: Zinc Alloy
- Connection Thread: 510
- Temperature control: 100- 300℃/ 200- 600℉
- Powered by single 18650 battery (Not included)
- Resistance range: 0.1- 3.0ohm KA mode/ 0.05- 1.0ohm for Ti/Ni
- Sports an advanced XT80 chipset
- Short Circuit Protection
- Low Resistance Protection
Pre-order prices of this look great you know!
I am a fan of single battery mods I regularly use the Wismec Sinuous P80 as it is just so handy so this could be a worthwhile replacement?
Is the HCigar T80 on your wishlist? Let me know in the comments below!