ehpro mod 101 pro kit preview

The Mod 101 Pro Kit By Ehpro Previewed

The Ehpro Mod 101 Pro Kit includes the 101 Pro mod and the Ehpro Lock RDA.mod 101 pro poster

Free WorldWide Shipping

The Lock RDA is a “semi-rebuildable” – I have already written a preview for it here – but in summary you slot in the notch coils and just add wicking.ehpro lock rda banner

You can also use standard coils. But with the notch coil option it is easier for people with poor hand dexterity (like me) or those new to building.lock rda notch coil

The kit also includes a BF 510 pin if you want to use the Lock RDA on a squonk mod.ehpro lock rda squonk pin

The mod part of the kit is the new Mod 101 Pro. The original mod 101 was also a regulated tube mod but only had a maximum 50W output.101 pro mod

The Mod 101 Pro will output up to 75W and can use a 21700, 20700 or 18650 battery.mod 101 pro batteries

The mod also has temperature control and by-pass power modes.

There is a 0.69in screen even though this is only 25mm diameter and gives the appearance of a mechanical tube mod.mod 101 pro screen

Plenty of safety features make this mod even better! You get short circuit, overheat, battery reverse and 10 second cut off protections.

There are 4 colour options to choose from – Stainless Steel, Black, Blue and Rainbow.101 pro kit colours

Kit Includes

  • Ehpro Mod 101 Pro mod
  • Ehpro Lock RDA
  • Screwdriver
  • 2xfused clapton Lock coil
  • Bottom feed 510 squonk pin
  • O-rings
  • Cotton
  • Spare screws
  • 510 drip tip adaptor
  • User manuals
  • Beauty ring
  • 18650 battery adaptor
  • Heat insulator

101 pro kit contents

Ehpro Mod 101 Pro Specs

  • Size: 25×117.5mm
  • Battery: 21700, 20700 or 18650
  • Maximum output: 75W
  • Display: 0.69in
  • Resistance range: 0.01-3ohm
  • Power modes: Variable Wattage, Temperature control (Ni, Ti, SS), By-pass

ehpro mod 101 pro specs

Ehpro Lock RDA SpecsĀ 

  • Size: 24x28mm
  • Material: Stainless steel & Resin
  • Slot in notch coil deck
  • BF squonk pin included
  • Side up adjustable airflow
  • Able to also use a single standard coil

lock rda specsI really like the look of this kit!

The simple building options for the Lock RDA really appeal to me.

I love a regulated tube mod – I own the Uwell Nunchaku and would love an iJoy Saber too so the 101 Pro looks ideal.

Let me know your thoughts on the Ehpro Mod 101 Pro Kit in the comments below!

My name is Michelle - I am 44 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again a few years ago and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod!


Please enter your comment!
Please enter your name here