The Eleaf iSolo S Kit is the latest release in the “iSolo” badged range of kits.

isolo s bannerSo far we have had the iSolo Air and the iSolo R – both pod kits – is the iSolo S in the same vein?

What To Expect From The Eleaf iSolo S Kit…

This kit takes the form of a more standard Box Mod and tank kit – but it still harks back to its “Pod Kit” heritage…

isolo s mod components

Worldwide Shipping – Save 10% With Code ECC

The mod has a standard 510 connection – meaning you can use other atomisers on here. Whereas the tank is a pod and tank hybrid – the pod locates magnetically in the tank base which has a 510 connection.

isolo s tank componentsThe mod houses a 1800mAh battery and can output up to 80W. I assume this has a Variable Wattage user mode – there is no mention if other modes are included?isolo s battery

A USB Type C port is provided for charging at up to 2A charge rate. Apparently a full charge takes around an hour.isolo s charging

If you use the AST coils (these are made from Austenitic Stainless Steel) you can also select the “smart coil protection” mode which should prevent the coil overheating from a lack of e-liquid.isolo s smart coil

An OLED screen is provided to view all your vaping data but the screen size has not been specified.

Included in the kit is the GX tank – which as mentioned above includes the tank base with a 510 connection so you can use this on other mods.isolo s tank features

This tank uses the GX range of coils which I have not seen used on other devices yet so may be a brand new range.gx coils

There are 2 GX coils – both AST and both included in the kit: 0.2ohm Dual Mesh and 0.5ohm Single Mesh.

The fill port is located on the top of the pod with a simple pop out plug to close it off.filling

The tank base houses the adjustable airflow control ring to adjust the incoming airflow to your preference.

Here is an introduction video from the Eleaf YouTube channel.

There are 4 colours to choose from: Black, Bronze, Blue and Silver.

colours

Kit Includes

  • Eleaf iSolo S Mod
  • GX Tank
  • 0.2ohm GX coil
  • 0.5ohm GX coil
  • USB Type C cable
  • User manual

contents

Eleaf iSolo S Mod Specs

  • Size: 27.6×26.4×126.9mm (including tank) / 27.6×26.4×75.7mm (mod only)
  • Output: 1-80W
  • Modes: VW
  • Battery: 1800mAh (internal)
  • Display: OLED screen – size not specified
  • Resistance range: Not specified
  • USB Type C port – 2A charge rate – 60 min charge time
  • Smart coil protection
  • 510 connection

Eleaf GX Tank Specs

  • Size: 26×55.7mm
  • Capacity: 5ml (Standard) / 2ml (TPD)
  • Adjustable bottom airflow
  • Side refill port
  • Coils: GX coil compatible
  • Magnetic pod to tank base connector
  • 510 connection on tank base

I think this is a nice looking kit – and the flavour from the AST coil in the iStick Mini 2 kit was beautiful so I have everything crossed this kit will perform as well!

Let me know what you think of the Eleaf iSolo S Kit in the comments below!

My name is Michelle - I am 45 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again a few years ago and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod!

LEAVE A REPLY

Please enter your comment!
Please enter your name here