The Geekvape Obelisk 60 is the second device bearing the “Obelisk” branding.
The first device in this range was the Obelisk 120 mod – which featured a super fast charging time. Will the Obelisk 60 have a similar feature?
What To Expect From The Geekvape Obelisk 60?
In one word – No… sadly.
What you do get however is a 2200mAh internal battery which has a USB charge rate of 2A. Geekvape promise that the battery would last for 48 hours of use – which is hard to get your head around as who knows what wattage they are basing this claim on.
Also they promise that the output will remain stable as the battery charge decreases due to the “high precision chip” and lower energy losses during discharge. Some more pretty graphs below to demonstrate this.
A 0.96in colour TFT screen is located on the side of the mod.
The mod body has a IML (in Mould Labelling) panel – which is basically a printed panel with multiple laminated layers enclosing it to prevent scratching. Also the panel has been created with fully recyclable material.
The pod is held in magnetically and a side fill port allows you to fill with up to 4ml (or 2ml in TPD regulated areas) of your own e-liquid.
You can replace the coil and two “P-series” coils are included in the kit : 0.4ohm and 0.5ohm.
The airflow is adjustable and following on from the “Zeus” or “Z” range of Geekvape tanks this has a top airflow inlet system to help prevent leaks.
Here is an introduction video from Geekvape.
There are 4 colours to choose from: Black, Gunmetal, Blue and Green.
- Geekvape Obelisk 60 device
- Coil tool
- P-Series 0.4ohm coil
- P-Series 0.5ohm coil
- USB Type C Cable
- User manual
Geekvape Obelisk 60 Specs
- Size: 47.5x97x24mm
- Battery: 2200mAh (internal)
- User modes: VW, TC
- Display: 0.96in colour TFT screen
- Output: 5-60W
- Resistance range: 0.1-3ohm
- Temperature range: 200-600°F / 100-315°C
- USB Type C charging – 2A charge rate
- Pod type: refillable, removable coil
- Capacity: 4ml (standard) / 2ml TPD
- Coils: P-Series coils
- Adjustable Top airflow system
- Magnetic pod retention
- IML design – scratch resistant, recyclable material
I am a bit confused with the Obelisk branding here as that name suggests the super fast charge capability. However that aside this looks to be a great little kit.
Let me know what you think of the Geekvape Obelisk 60 in the comments below!