The Innokin Sceptre Pod Kit is a new combination pod kit which is marketed towards two different vaping styles.
The device is apparently designed for MTL (Mouth to Lung) and RDL (Restricted Direct to Lung) vaping styles. We tell you more about these terms in our Guide to MTL and DTL.
A Closer Look At The Innokin Sceptre Pod Kit
In order to satisfy both styles of vaping there are 2 different airflow settings and 2 coils included in the kit.
For MTL Vapers the Sceptre 1.2ohm MTL coil is provided and the airflow switch on the side of the pod can be set to the MTL position to restrict the airflow the most.
For RDL Vapers the Sceptre 0.5ohm RDL coil is provided and set the airflow switch to the RDL setting.
Of course you could play around and use different airflow and coil settings as you please!
Also the output is adjustable – there is a standard power level and a boost level. The actual output depends on which coil is installed:
- 1.2ohm coil – Standard = 9W, Boost = 10W
- 0.5ohm coil – Standard = 18W, Boost = 20W
To vape you can either press the fire button or use the automatic draw activation.
A set of LED lights show you the battery capacity remaining and the power level selected.
Another cool feature is a small white LED which illuminates the pod to display the liquid level remaining.
The coils are replaceable and the pods are refillable via the side fill port.
A 1400mAh battery is provided and charging is taken care of via a Micro USB port.
Here is a short introduction video from Innokin to give you a closer look.
There are 5 colours to choose from: Blue, Black, Grey, White and Pink.
- Innokin Sceptre device
- 1.2ohm coil (installed)
- 0.5ohm coil
- Micro USB cable
- User manual
Innokin Sceptre Pod Kit Specs
- Size: 106.8x29x18mm
- Output: 9 or 10W (1.2ohm coil) / 18 or 20W (0.5ohm coil)
- Battery: 1400mAh (internal)
- Display: LED indicators plus light to display pod contents
- Resistance range: 0.5-3.5ohm
- E-liquid capacity: 3ml (Standard) / 2ml (TPD)
- Pods: Refillable, replaceable coil
- Coil options: Sceptre 1.2ohm or 0.5ohm Mesh coils
- 2 airflow options
- Auto draw or button fire
- Side fill port
- Micro USB port with 1A charge rate
I think this is a lovely looking kit – especially the girly pink versions! Let’s hope the usual Innokin quality and flavour are included too!
Let me know your thoughts on the Innokin Sceptre Pod Kit in the comments below!