The Battlestar Mini 80W by Smoant Previewed
The Smoant Battlestar Mini 80W is another Battlestar update – there is also the Battlestar Nano coming soon too!
We reviewed the original Battlestar earlier this year and it proved to be a great performer – so fingers crossed the Battlestar Mini is as good!
The Battlestar Mini as the name suggests is a small mod which uses a single 18650 battery which is not supplied. In Variable wattage mode the maximum output is 80W.
The mod is only 24mm wide so any bigger diameter tanks will overhang and look a bit silly.
Despite its weeny proportions this does boast a 0.96 inch OLED display which I have to say does look great in the marketing images.
The rear cover is held in place with magnets which worked well on the original Battlestar.
You can choose from two colours – Black and Yellow.
A promo video for the Smoant Battlestar Mini 80W was shared on the Smoant official Twitter page so I have added it here for you to watch.
— Smoant (@Smoant) November 27, 2017
- Smoant Battlestar Mini 80W mod
- Micro USB charging cable
Smoant Battlestar Mini 80W Specs
- Size: 37mmx24mmx81mm
- Single 18650 battery
- Display: 0.96 inch OLED screen
- Output range: 1 – 80 W
- Output modes: VW / VW Curves /Bypass / Temp (Ni, Ti, SS) / TCR
- Resistance range: 0.05 – 2.0 Ohm for Temp / TCR mode
0.1-5.0 Ohm for VW / VW Curves
- Temperature control: 100 – 315°C / 200 – 600°F
- Can be charged through USB directly
- Puff counters available
- Reverse protection/ Over-heating protection/ Low voltage protection /Short-circuit protection/ Over-time protection
- Colour: Black and Yellow
For the pre-order prices I am seeing online this could be a great buy!
This isn’t the most powerful or most flashy mod out there, but for a good starter/intermediate mod this would do the trick.
It is small, needs only 1 battery and for a lot of tanks you would be hard pushed to need to go above 80W unless you were an advanced vaper.
I would like to see a nice Pink, Purple or Stainless steel one! Go on Smoant – spoil us!