The Steam Crave Hadron Mini Kit might look small but it sure is mighty!
What To Expect From The Steam Crave Hadron Mini Kit…
The full kit contains the mod and the Aromamizer Supreme V3 RDTA which I have already covered here in another preview.
This tank is very versatile with lots of different deck options. You get the Single coil deck, Mesh deck and Postless deck included plus these all have Squonk pins if you want to use on a Squonk mod.
There is a bottom adjustable airflow with plenty of adjustment and you can turn the airflow ring upside down to give more options.
Plus you can adjust the capacity using different glasses and extension sections.
Not only is the tank versatile but so is the mod, you can use either a 20700, 21700 or with the included adaptor a 18650.
Output wise this is specified as 1-100W (0.2-9V) – I imagine the output may be lower with a 18650.
Plus with this having a DNA chipset you can update the firmware when updates appear.
A 0.9in colour TFT screen is provided and so is a USB Type C port.
The USB port is used for charging at up to 3A charge rate, firmware updates, customisation with Escribe and also you can use this as a powerbank with the “OTG” (On The Go) mode to charge up other devices.
There are 2 colours to choose from: Gunmetal and Black.
Combo Kit Includes
You can also buy just the mod on its own.
- Steam Crave Hadron Mini Mod
- 2x 21700 Battery Wraps
- 1x 18650 battery adaptor
- Steam Crave Sticker
- Aromamizer Supreme V3 RDTA (including single coil deck and 5mm chimney)
- 7ml bubble glass
- 7mm chimney
- 510 drip tip adaptor
- Mesh deck kit
- Postless Deck
- Spare parts
- Allen Key
- USB Type C cable
- User manual
Steam Crave Hadron Mini Mod Specs
- Size: 39.7x26x96mm
- Output: 5-100W / 0.2-9V
- Modes: VW, TC (Ni, Ti SS), Bypass, Replay, Boost
- Battery: 1x 18650 / 20700 / 21700 (not included)
- Display: 0.9in full colour TFT screen
- Resistance range: 0.1-3ohm
- Temperature range: 200-600°F / 100-315°C
- USB Type C port – 3A max charge rate
- Material : Aluminium Alloy, Zinc Alloy
- DNA 100C Chip
- Suitable for tanks up to 25mm diameter
- OTG charging (use as powerbank)
- Upgradeable Firmware
- Pass through charging
Steam Crave Aromamizer Supreme V3 RDTA Specs
- Size: 25mm diameter, height: 59mm (in 6ml and 7ml mode) / 45.5mm (in 2ml mode)
- Capacity: 2ml (in RDA mode), 6ml (with straight glass), 7ml (with bubble glass)
- Adjustable airflow with 3 rows of honeycomb air inlets to choose from
- 5mm and 7mm chimney options
- Upgraded juice flow control
- 1/4 turn top refill cap
- Single coil deck (included)
- Mesh and postless decks (available separately or included in advanced kit)
- Optional velocity deck
- Squonk Pin
So yes it is unusual to see something “Mini” from Steam Crave – but even so this is still a beast!
Let me know your first impressions of the Steam Crave Hadron Mini Kit in the comments below!