A new kit release from Vapefly has arrived – meet the Vapefly Kriemhild Kit.
Blimey I have spelt that wrong so many times – almost as bad as having to type Cthulhu!
The name reminds me of some kind of expensive cheese? But apparently she is the wife of a Germanic legend called Siegfried featured in the Nibelungenlied… Nope still none the wiser.
Let’s Have A Look At The Features Of The Vapefly Kriemhild Kit
Firstly let’s dive in and see what the mod has to offer.
This is a dual battery mod which can use 18650, 20700 or 21700 batteries.
Located on the front is the 1.33inch TFT screen to view all your user data and settings.
The rear of the mod is the battery cover and is secured by a lock button. Located on the battery cover is the “breathing light” basically a programmable light which shines through the back of the mod.
The mod has a USB Type C charging port and can be charged at up to 3A charging rate.
If you purchase the full kit the Kriemhild sub ohm tank is included.
This has push in /pull out coil heads and the tank will seal itself when the coil is removed to prevent loss of e-liquid.
There are several coil options but Vapefly do not say which you get in the kit sadly:
- Ni80 0.2ohm single mesh coil
- KA1 0.2ohm dual mesh coil
- Ni80 0.15ohm triple mesh coil
- RBA coil deck
On the base of the tank is the airflow adjustment ring.
To refill unlock the top cap by first lifting and then slide across to access the fill port.
There appears to be 4 different colours to choose from however this is not officially stated on the Vapefly website. But they look to be Full Black, Gunmetal, Silver and Black/Gold.
- Kit contents not specified
Vapefly Kriemhild Mod Specs
- Size: 38.6×47.5x91mm
- Output: 5-200W
- User modes: VW, TC
- Battery: 2×18650 / 20700 / 21700 (not included)
- Resistance range: 0.02-3ohm
- Temperature range: 200-600°F / 100-315°C
- Display: 1.33in colour TFT screen
- 3A Type C USB charging
- Breathing light on rear
Vapefly Kriemhild Tank Specs
- Size: 26×55.5mm
- E-liquid capacity: 5ml
- Coils: Ni80 0.2ohm Single Mesh, Ka1 0.2ohm Dual Mesh, Ni80 0.15ohm Triple Mesh and RBA coil head
- Adjustable bottom airflow
- Pull out coil fitment
- Tank contents sealed when coil removed
- Locking slide top fill
Well Vapefly have been knocking out some quality vape gear lately so let’s hope this kit follows in the same tradition.
Let me know what you think of the Vapefly Kriemhild Kit in the comments below!