The Flag Kit By Avidvape Previewed
There is an internal 2800mAh battery. This is pretty good for a small device.
A 0.91in OLED screen is mounted on the side of the mod between the fire button, adjustment buttons and USB charging port.
Included in the kit is the Avidvape Flag tank.
This has a capacity of 2ml and is 22mm in diameter. The mod is only 23.5mm wide so I expect 22mm is the largest diameter tank you could use without overhang. However some of the promo shots show the Avidvape Ghost Inhale RTA on top of the Flag mod and this has a 24mm diameter!
Included in the kit are two coil heads – one is 0.2ohm and the other is 0.4ohm. There is not much detail about these – what material etc. However these are sub ohm coils so not really a starter kit, more for Direct to Lung (DTL) high VG vapers.
There are 4 colours to choose from: Gray, Blue, Red or Yellow.
- Avidvape Flag mod
- Avidvape Flag tank
- 0.2ohm coil
- 0.4ohm coil (installed)
- USB cable
- Spare glass tube
- User manual
Avidvape Flag Mod Specs
- Size: 72x44x23.5mm
- Weight: 161g
- Display: 0.91in OLED
- Output wattage: 1-80W
- Voltage range: 0.1-8V
- Resistance range: 0.1-3 ohm (VW), 0.05-3ohm (TC)
- Temperature range: 90-315°C / 200-600°F
- Thread: 510 thread
- Battery: internal 2800mAh
- Modes: Variable Wattage, Bypass and Temperature Control
Avidvape Flag Tank Specs
- Size: 22x44mm
- Capacity: 2ml
- Adjustable airflow
- Material: stainless steel
This did surprise me – the price is a bit high for a relatively un-known company.
But you do get the tank and mod in the kit and won’t need to buy batteries etc, you will only need E-liquid to get started.
Do you fancy the Avidvape Flag Kit? Let me know your thoughts in the comments below!