The Dovpo X Signature Mods Clutch X18 Dual Mech Mod is a dual battery version of the popular “Clutch” range.
More Details On The Dovpo X Signature Mods Clutch X18 Dual Mech Mod…
This is a design collaboration between the original Clutch designers Signature Mods, plus the vaping brand Dovpo and reviewer Mike Vapes.
As mentioned this houses 2×18650 batteries which of course are not included and these have a parallel configuration (the battery capacity and Amp output are doubled but the voltage is the same as a single battery).
You also have adjustable battery contacts accessed by turning the screws on the base of the mod.
The battery housing (or sled) is made from a commercial grade 3D printing construction.
To access the batteries and other internal components the mod side panels are removable.
The clever part of this kit is the width increase depending on which side panels you use.
The standard panels make the mod 25mm wide – ideal for atomisers up to 25mm diameter.
However if you use larger atomisers the included thicker panels will increase the mod width to allow use with a 28mm atomiser without overhang.
The body is made from solid billet Aluminium which is machined, shot blasted and anodised.
The 510 connection is a hybrid type which means the top of the batteries directly send power to the 510 positive pin of the atomiser. This means you must choose your atomiser carefully to make sure there is plenty of insulation and a good clear distance between the positive 510 pin and the outer negative connector. A hybrid connection reduces the resistance in the circuit by keeping all components to a minimum.
Talking of internal resistance – the contacts in the mod are either brass or solid silver – again to improve conductivity for maximum output.
The clutch fire button is also compatible with the Clutch and Clutch Topside SQ devices to allow more option for customisation.
You also have a safety lock to lock the fire button to prevent accidental firing.
A fuse is included to help improve safety which has a 37A rating. You can buy a bypass plate separately if you want to remove the fuse from the circuit completely.
Sadly as pointed out on the video below the fuse is held in by Torx screws – they include 5 spare fuses and screws but no screwdriver!
Here is an introduction video from Co-designer Mike Vapes introducing the X18 mod…
There are 5 colour options to choose from: Black, Red, Blue, Green and Gunmetal.
- Clutch X18 dual mech mod
- 1x thicker door
- 5x fuse
- Flathead screwdriver
- Extra screws
Dovpo X Signature Mods Clutch X18 Dual Mesh Mod Specs
- Size: 81.4×50.9mm – width adjustable using standard (25mm) doors or thicker (28mm) doors
- Output: full battery output
- Battery: 2x 18650 (not included) – parallel configuration
- Resistance range: not specified
- Maximum tank diameter: 25mm (standard doors) / 28mm (thicker doors)
- Material: Solid Billet Aluminium – fine shot blasted and anodised
- 510 hybrid connector
- Brass and solid silver contacts
- Locking fire button
- Adjustable battery contacts
- Fused protection – 37A
- Fuse bypass kit available
- 2 sets of battery doors available to increase / decrease width for compatibility with different tank diameters
- Compatible fire button with Clutch and Clutch Topside SQ
- 3D Printed battery sled – removable
- PEEK 510 isolator
So will the Dovpo X Signature Mods Clutch X18 Dual Mech Mod please the Clutch fans?
Let me know what you think in the comments below!