pioneer 4 you ipv v3-mini kit preview

The IPV V3-Mini Kit By Pioneer 4 You Previewed

The Pioneer 4 You IPV V3-Mini Kit is one long winded name for a tiny little device!v3-mini poster

Free WorldWide Shipping

Following on from previous P4Y mods such as the IPV Aspect and IPV V-IT this has an internal YiHi SX635J chip which has an ESS driver…ipv v3-mini components

ESS stands for “Electronic Spray Squonk”. So now you know!

Basically this is a squonk mod – however it uses temperature control to sense when the coil is over heating through lack of e-liquid in the atomiser. The chip then tells the bottom feeding system to spray e-liquid into the atty.ipv v3-mini promo shots

According to P4Y this kit is anti burning, no leaking and no spilling.

The e-liquid lives in a little chamber in the side of the mod and is connected via tubes to the 510 connection. You can buy replacement containers in packs of 3. Apparently the e-liquid being separate from the heating element keeps the flavour fresh and pure?ipv v3-mini diagram

The box also contains an internal 1400mAh battery and there is a screen on the side.ipv v3-mini views

Included in the full kit is the IPV Elf ADA. I have no clue as to what ADA stands for I am sorry. Plus there is very little info on the little Elf apart from the fact there are two resistance options. You can also buy this on its own in a pack of 2.elf ada package

According to which atomiser you are using the mod will select a power preset.

  • 0.3ohm (Ni-Mn Alloy) – choice of 12-15W (P1) or 22-25W (P2)
  • 1ohm (SS316) – choice of 6-8W (P1) or 10.5-12.5W (P2)

ipv v3-mini modesThe atomiser has an adjustable airflow too and is bottom feed from the squonk container.ipv v3-mini liquid container pack

There are different colour and panel combinations available. First choose the main body colour – Black, Gunmetal or Silver.ipv v3-mini body colours

Then choose the panel design from Carbon Fibre – C1 or C2, Magical M1, M2 or M3 or Texture T1 or T2.

ipv v3-mini panel colours

Kit Includes

  • IPV V3-Mini Mod
  • Elf ADA atomiser
  • E-liquid container
  • USB Cable
  • User manual

The E-liquid containers and Elf ADA are also available to buy separately.

ipv v3-mini kit contents

IPV V3-Mini Mod Specs

  • Size: 46.2x78mm
  • Output: 6-25W (Depending on atomiser installed)
  • Battery: 1400mAh (internal)
  • Power modes: 0.3ohm coil = 12-15W or 22-25W, 1ohm coil = 6-8W or 10.5-12.5W
  • Temperature control range: 180-260°C / 356-500°F
  • Display: OLED IPS HD
  • E-liquid container capacity: 3.5ml (standard) / 2ml (TPD)
  • ESS auto bottom feeding squonk system
  • Intelligent temperature control
  • YiHi Chipset
  • Anti Burning, No leaking, No spilling

IPV V3-mini mod specs

IPV Elf ADA Specs

  • Size: 14×28.1mm
  • Comes with 0.3ohm and 1ohm coils
  • Adjustable airflow

elf ada specs

This does look tiny but I would like a bit more info on the Elf ADA plus if you can use other atomisers on here?

Do you think the Pioneer 4 You IPV V3-Mini Kit is clever enough to get you squonking? Let me know in the comments below!

My name is Michelle - I am 43 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again last year and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of February 2018 and that is all thanks to vaping! I am a huge dog lover and volunteer for my local dog rescue.


Please enter your comment!
Please enter your name here