The Zephyr 200W Kit By Snowwolf Previewed
The Snowwolf Zephyr 200W Kit is a proper mod and tank kit! Not a pod mod! Which is rare at the moment!!
Anyway let’s get stuck in to see what this kit has to offer!
Starting with the Zephyr mod – this is quite rare – from what I can see this has an internal (non removable) battery which has a massive 5000mAh capacity.
Another feature of this battery is the super quick charging time.
As this has a type C USB port this means there are more options for charging capabilities and this can be charged at up to 4.5A. Bearing in mind some older devices and USB ports only output 0.5A – this is a lot higher charging rate.
Also to enable this quick charging you get an adaptor in the kit which I assume is for plugging into the mains. But I think you will need to make sure the plug is of the spec of the country you are in!
With this quick charging system Snowwolf say the device can be fully charged in 35 minutes!
The Zephyr will output between 5 and 200W with a super quick 0.0008 second fire time via the new IFV960 chipset.
Included in the kit is an un-named tank – which for the purposes of this preview I have called the “Zephyr Tank” – clever huh!
This is pretty standard sub ohm tank fare with a 0.17ohm Mesh coil included. I am not sure if this is compatible with other coils but this is a WF coil. The “Wolf” tank for instance also uses WF coils so they might be compatible.
The tank has bottom adjustable airflow and a top filling mechanism.
Here is a brief introduction video to the Zephyr 200W kit from Snowwolf.
There are 3 colours to choose from: Stainless, Rainbow and Blue.
- Snowwolf Zephyr 200W mod
- Snowwolf Zephyr Tank
- WF-X1 coil
- Spare glass
- Spare seals
- Charging adaptor
- Type C USB cable
- User manual
Snowwolf Zephyr 200W Mod Specs
- Size: 90x47x30mm
- Output: 5-200W
- User modes: VW, TC
- Battery: 5000mAh (Internal)
- Type C USB – 5V/2.5A or 10V/4.5A charging – can be fully charged in 35 minutes
- Resistance range: 0.5-3ohm
- Temperature range: 200-570°F / 100-315°C
- Display: 2inch TFT touch screen
- IFV960 chipset
- 0.0008 second fire speed
- Rear breathing LED wolf logo
Snowwolf Zephyr Tank Specs
- Size: 28x46mm
- Capacity: 5ml (bubble glass) / 4ml (standard glass)
- Top filling
- Adjustable bottom airflow
- Coils: WF coils (WF-X1 Mesh Included)
OOh I do like the look of this – that screen looks amazing and the quick charging could be very handy!
What do you think of the Snowwolf Zephyr 200W Kit? Let me know in the comments below!