The A-Feng Pod Kit By Snowwolf Previewed
The Snowwolf A-Feng Pod Kit is a new pod mod with a replaceable battery. This is the second kit I have seen with this option – the other being the Mechlyfe Ratel Pod Kit.
So as stated above this device is powered using a single 18650 battery which is not included in the kit.
The battery compartment is accessed via the side magnetic cover.
The device will output between 16 and 22W and according to Snowwolf the IFV Smart Chip will control the output automatically. It seems that the power will adjust according to how long the fire button is held down – higher output in the first few seconds and then dropping down.
There is also a type C USB charging port and LED battery indicator.
The pod is the e-liquid container and where the coil lives and you will be pleased to hear you can replace the coil on this device.
There appears to be only one coil option available at present a 0.6ohm mesh with organic cotton wicking. This is also compatible with the Snowwolf Wocket Kit.
On the base of the coil is an airflow ring which you can use to adjust the airflow to your preference.
To access the filling port on the side of the pod you can remove the side panel and rubber cap.
Here is a brief introduction video from Snowwolf.
There are 5 colours to choose from: Black, Champagne Gold, Indigo Blue, Rose Red and Space Grey.
- Snowwolf A-Feng device
- Spare coil
- Drip tip protection cap
- Type C USB Cable
- Spare parts
- User manual
OBS Alter Pod Kit Specs
- Size: 44×78.5×22.5mm
- Output: 16-22W – not adjustable
- Resistance range: 0.3-1.5ohm
- Battery: 1×18650 battery – not included
- Display: LED indicators
- E-liquid capacity: 3ml (standard) / 2ml (TPD) – refillable
- Coils: 0.6ohm mesh – replaceable
- Bottom airflow adjustment
- IFV Smart Chip inside
- Magnetic side cover
This could be a handy little kit – especially as you can replace the battery and coil.
Let me know what you think of the Snowwolf A-Feng Pod Kit in the comments below!