When you first look at the VooPoo Drag Nano 2, it looks novelty, especially with the chain attached.

But don’t let it’s appearance fool you, it is as good as any other Mouth To Lung pod system.

voopoo drag nano 2

As the name suggests this isn’t the first of it’s kind, the original Voopoo DRAG Nano was released in 2019.

Back then the DRAG range was a range of high powered box mods, however the range is much different today, consisting of 15 mods (both tube and box), 1 pod system (the Nano) and 3 pod mods.

The Voopoo brand was established in 2016 but it’s parent company has been around since 2010.

Throughout the last 5 years VooPoo has had a huge global success.

A few years ago their DRAG box mods seemed to be the thing to have and they put Voopoo firmly ‘on the map’.

However it arguable that their best year was last year, with the launch of the VooPoo DRAG pod mods and more importantly the PNP range, which VooPoo very quickly expanded on… Alot!

At the time of writing Voopoo’s website boasts that they have sold more than 30Million e-cigs to an audience of 200 countries.

Although I wouldn’t say I am a fan of every VooPoo Product, that certainly have my respect.

What Can We Expect From The VooPoo DRAG Nano 2?

My friend the FlatCap Vaper reviewed the original VooPoo DRAG Nano for EcigClick and gave it a 6.3 out of 10.

I on the other hand thought it was a fairly decent, although not perfect device, however, he did make a lot of important points on how the device could and should be improved.

Voopoo DRag Nano 2 brown with voopoo logoAnd they have certainly made improvements.

The original has a really awful and tight filling port and Voopoo has addressed that by giving the DRAG Nano 2 a top fill port…I have got a few complaints about it but it is much better.

The pods are cross compatible with the Vinci Pods (not to be confused with the Vinci pod mod pods). What a tongue twister that turned out to be!

The pods are refillable and have built in coils. There are 2 different pods available for the kit a 0.8ohm and a 1.2ohm pod.

The kit has 3 different power settings, adjustable airflow and 3 lights to indicate the battery level.

Worldwide Shipping – Save 10% With Code ECC

Inside the Box

There are 3 kits available: Standard, US and TPD. All of the kits have the same contents.

On the original DRAG Nano, the lanyard was limit to the first 500,000 devices, however the DRAG Nano 2 comes with the lanyard as standard.

  • 1 x DRAG Nano 2 Device
  • 1 x DRAG Nano pod 0.8ohm
  • 1 x DRAG Nano pod 1.2ohm
  • 1 x USB-C Cable
  • 1 x Lanyard
  • User Manual


  • Size: 72 x 44 x 14.2mm
  • Battery: 800mAh
  • Pod Material: PCTG (Plastic)
  • Mod Material: Zinc Alloy + Leather (or PC)
  • Output Power: 8-20W
  • Output Voltage: 3.2-4.2V
  • Charging: 1A USB-C
  • Resistance Range: 0.1-3Ohms


  • Top Fill Pods
  • Vinci Pod Compatible
  • Adjustable Airflow
  • Adjustable Power
  • Draw Activation (only)
  • Gene Chip
  • 7 Battery protections

Design & Build Quality

The Voopoo DRAG Nano 2 comes in a variety of 8 colours: 5 leather and 3 PC – all of which have a silver metal frame.

Voopoo DRag Nano 2 colours

I received the Orange Leather.

VooPoo DRAG Nano 2 Battery Section

The Voopoo DRAG Nano 2 is as incredibly well built as the original.

As I have a leather version, I can’t comment on the PC colours.

Voopoo DRag Nano 2 side with drag logo

However if they are anything like the leather they’re awesome.

There is a leather patch on either side. One side has the DRAG logo stamped into it which is fully size of the patch. The other side has a small Voopoo logo stamped into the bottom. Both patches have a border stamped in, are slightly padded and are really well stuck.

The USB-C charging port is on the bottom with the Gene Chip marking, the back in completely blank.

The top has the Pod port and lanyard/chain holes whole the front has the button, 3 led indicators and airflow control.

Obviously I’m not a major fan of USB ports being on the bottom of the device, so there is some loss of design points there.

The metal is shiny and the entire device is smooth.

DRAG Nano 2 Button

The Voopoo DRAG Nano 2 only has 1 button.

It’s a super small button, measuring at 4.5mm in diameter and it’s raised by about 1mm.

voopoo drag nano 2 button

However this button is only for functionality such as turning the device on/off or changing the power setting.

Despite it’s size, the button has the typical Voopoo radial pattern on it.

The buttons tension is just right, in my opinion. It is easy to press but not so easy that pressing it accidentally is an issue.

3 LED Indicators

Just above the button is 3 small LED indicators. From top to bottom the indicators span across 7mm but each LED is only 1mm in diameter.

The lights are plenty bight enough and easy to see in any light setting, but they’re not unnecessarily bright.

Voopoo has made the indicator light a lot more simple to remember. Each LED symbolises 33% (a third) of the battery level.

So here’s what the battery level shows:

  • 0 – 33% = 1 LED light
  • 33 – 66% = 2 LED lights
  • Above 66% = all 3 LED lights

The colour of the lights signify the power setting.

  • Blue = Minimum power
  • Green = Medium power
  • White = Maximum power

Voopoo DRAG Nano 2 Airflow Control

The airflow control on the Voopoo DRAG Nano 2 is placed above the LED Indicators and it’s a little bit different to other devices.

It consists on a little knob which is attached to a plate, on one side of the knob the plate is solid, to restrict the airflow.

VooPoo Drag nano 2 airflow control

On the other side of the knob the plate has a gap through the center to allow more airflow.

The knob is fairly stiff to move, but no so stiff that it is a hindrance, even for us nail biters.

To change the airflow you simply slide the knob up or down. While pushed down the airflow is a nice restrictive draw and when it’s pushed up it’s fairly loose, in fact it’s almost restriction free.

The rest of the airflow comes in down the side of the pod.

Voopoo DRAG Nano 2 Pod Port

The pod port is a rounded rectangle shape, right at the bottom, there is a plastic plate with 2 small holes in the center.

These small holes are for the draw activation sensor. At either side of that is a connection port.

Voopoo DRag Nano 2 pod port

Other than that there isn’t really anything of interest, except from the 2 indents on the lengths of the port walls.

These indents correlate to a lip on either side of the pod to secure the pod into place.

I can’t recall how deep the original port was but it is evident that the new pod port it such shallower, thank to the redesign of the pods.

Voopoo DRAG Nano 2 Pods

The body of the pods is pretty standard.

The part of the pod that goes into the port is black and thinner than the rest of the pod.

voopoo drag nano 2 pod

Above that part is transparent, and with the vast majority of the e-liquid above the port, you can easily see how much liquid is in the pod.

I haven’t mentioned the fill port yet because it’s underneath the mouth piece.

You remove the black mouth piece by pulling or tipping it off. By doing so you expose the silicone bung which goes all the way across the top of the pod.

Lifting it at one side exposes the filling hole

There are a few issues here…

First of all, I’m not very keen on the filling port being under the mouth piece because it can’t be good for long term, however because they’re replaceable pods I’m not that fussed.

Voopoo DRag Nano 2 inside the mouth piece

Secondly, usually with this design there is rubber inside the mouth piece that presses onto the silicone bung to ensure is doesn’t leak, however with the VooPoo Drag nano 2 pods, the mouth piece is hollow. This means if the bung isn’t perfect there will be leakage.

Finally, there is no divide or real gap between the fill hole or chimney.

Voopoo DRag Nano 2 filling hole

Although that isn’t a major issue if you’re careful but it does put the chimney at risk of being ‘flooded’ especially if the pod is overfilled.

Voopoo DRAG Nano 2 Chain

As I mentioned at the beginning of the review, all VooPoo DRAG Nano 2s come with a chain.

Which is essentially a necklace which you attach to the lanyard slot on the side of the device.

with the chain

The chain is 80mm long and has a proper clasp. Sure it’s a bit novelty but it is super handy for days out and such.

For example, I took the original to Leeds Fest as a back up (and I also wanted a MTL vape so I wasn’t clouding people out if it was windy and I was in a condensed crowd).

Voopoo DRAG Nano 2 Quick Start Guide

Replacing The Pod

The Voopoo DRAG Nano 2 coils are built into the pods, so when it’s time to change you simply dispose of the pod and start using a new one.

Don’t forget when you fill a pod for the first time you should leave it to soak for 5 minutes before using it.

Filling The Voopoo DRAG Nano 2 Pod

You can do this with or without the pod inside the mod.

Voopoo’s instructions tell you to do it with the pod in the port.

under neath the mouth piece

However, I think it’s easier (and safer from leaking) if you do it without the pod connected.

  • Press the mouth Piece (black part) to the side to remove it.
  • Lift the black silicone seal
  • Fill through the newly exposed fill hole
  • Reapply the black silicone bung
  • Press the mouth piece back on (in either rotation)
  • If this is a new pod and you’re filling it for the first time, allow the pod to soak for 5 minutes.


  • Turn on/off = press button 5 times in quick succession
  • Adjust wattage = press button 3 times within 1.5 seconds, Click the button to change power setting. Save and exit by leaving for 3 seconds.
  • Airflow adjustment = Slide the airflow knob up to open more and down to close more.
  • Vape = Suck on the mouth piece while device is on
  • Check battery level = use the device, or quick press the button

How Does the Voopoo DRAG Nano 2 Perform?

I tried the pods out with Got Salt Peachy Promise, which is a 50VG/50PG nic salt, the flavour profile is Peach and passion fruit and I was using them with 10mg nicotine strength.

0.8ohm Voopoo DRAG Nano 2 pod

This pod is awesome! At full power (white light) and the airflow fully open you get a pretty awesome flavour, which pretty much floods the mouth.

The vapour production create just a little less vapour than you would get smoke from a cigarette.

0.8ohm pod

It’s super smooth but from my experience turning the airflow down makes it a little bit less smooth and reduces the flavour.

As you go down through the power settings, you get a similar experience, the only difference been is with less power I preferred the airflow a little less.

I was going to go through the different power settings and different airflow but that could be pretty long and would be very boring. Boring because it’s just great, there is awesome flavour for every MTL style.

Even the lowest power with full airflow gives awesome flavour.

Although there were flavour dips, they weren’t often and didn’t last long.

1.2ohm Voopoo DRAG Nano 2 pod

Low and behold this pod is fairly good too, although I don’t think it’s so much of an ‘all rounder’.

For me this pod was best on full power with the airflow half open.

1.2ohm pod

When the airflow is set to fully open or on the weakest power, the flavour is lessened a lot, but still not flavourless.

The Vapour production is lessened, but i don’t think there was a great deal of difference.

Higher VG E-Liquids

I only had one of each pod. So I used both pods for 5 days each and then filled them with Rochford Project Lemon meringue, which is a 70VG/30PG liquid.

Both Pods handled the e-liquid quite well, in fact the results were pretty much the same as with the 50vg/50pg e-liquid although there were more flavour dips.

That been said, I don’t recommend using these pods for high VG liquids. The coils inside the pods are small with small wicking holes, using high VG liquids will drastically depreciate the life span of the pods.

Voopoo Drag Nano 2 Battery Life & Charging

It’s not quite clear at what wattage the kit uses with what pod so it’s hard to do my usual battery life math.

However, I can say the battery with the 0.8ohm coil lasted me a full day.

Voopoo drag nano 2 chargimg

I think the shortest it lasted during my time testing it was 8am till 4pm, but I was vaping a lot that day.

The 0.8ohm pod should last you about 6 hours if you are frequently using it. The 1.2ohm pod lasted a fair bit longer, it generally lasted me about 10hours of frequent use.

If you’re thinking that the battery life isn’t quite fast enough for you, fear not.

The VooPoo DRAG Nano 2 charges in about 45-50 minutes, I think that is pretty awesome.

I found if I fully charged it, then gave it a bit of a top up charge while I drove home (15-20 minutes), the battery with either pod, lasted me a full day (16-18) easily.

Does the VooPoo DRAG Nano 2 Leak?

It doesn’t really leak and I haven’t really had condensation in the pod port.

I can’t say none at all because there was one very small drop of liquid under the 1.2ohm coil. But that was it.

That been said, there has been the odd occasion that I have noticed a small amount of liquid inside the mouth piece, when I have removed it to fill the pod.

But it’s only a small amount and I didn’t notice it every time. So it is possible that the liquid was spilled the last time I filled it, the liquid never leaked out fully.


  • Less than 1 hour to fully charge
  • Diverse Airflow
  • Good Flavour
  • Doesn’t leak


  • The Top fill system could be better designed
  • Changing the power is fiddly (not an issue unless you do it all the time)

Final Review Verdict

With hindsight, it seems a bit like VooPoo made the orginal DRAG Nano for pure novelty.

Don’t get me wrong the novelty aspect has always been obvious, but it seems like they didn’t put a huge amount of effort into it.

Then they realised people liked it, so they actually made an effort to make it into a decent pod.

Hat’s off to VooPoo, they listened to everyone’s opinions and used them to improve.

If you look back at FlatCap Vapers review of the original, you will notice they have improved everything on his list of ‘Cons’.

They improved the pod, making it easier to fill and less ‘cheap’.

They even went to the extent of giving the device less ‘finger print magnet’ surfaces.

Then, for the icing on the cake, they even added adjustable airflow.

All in all they’ve done a pretty good job, to the extent the only thing I can complain about is they didn’t put enough thought into the filling port.

Although the device is still a novelty type of device, it is now a notable pod system for starters or for a side / back up device.

Is this a pod kit you’re using or looking to buy?

Please let me know your thoughts and opinions in the comments below.

Worldwide Shipping – Save 10% With Code ECC

Harley Vape Mill

Vaping since (2012), back when choice was limited. I was rebuilding my RDA and powering it with the awesome the Vamo V2. In 2019 I’ve opened a “Brick and Mortar” vape shop, a Vaping Mystery Box service and launched a YouTube channel that’s already gained 500 followers. Between Vaping and family, i don't often have a second to spare. My YouTube subscribers have already dubbed me “brutal”. What can I say? I’m here to do honest reviews, not a sales pitch.

Build Quality
Design Quality
Ease of use
0.8ohm pod
1.2ohm pod
Replace if lost or stolen
Vaping since (2012), back when choice was limited. I was rebuilding my RDA and powering it with the awesome the Vamo V2. In 2019 I’ve opened a “Brick and Mortar” vape shop, a Vaping Mystery Box service and launched a YouTube channel that’s already gained 500 followers. Between Vaping and family, i don't often have a second to spare. My YouTube subscribers have already dubbed me “brutal”. What can I say? I’m here to do honest reviews, not a sales pitch.
voopoo-drag-nano-2-reviewThe design lost a few points purely because of the filling port. make a bump between the port (or put silicone around it, and fill the mouth piece with silicone. then you'll have a 10. Took 2 points off the ease of use because changing the power could be less fiddly, it doesn't always go as well as it should, maybe a bit harsh, but I think it's fair.


  1. Just wanted to let you know the phrase is “that BEING said” not “that been said”. Otherwise great review, got mine without doing any research at all and it being a spontaneous purchase your review makes me feel confident in the decision. Keep up the good work

  2. I recently got the Voopoo Drag Nano 2 and the only complaint I have is taking the mouth pice off to refill it. It’s just hard to take off. Other then that I love it. Way better then a Novo from smock. Although I did love my Novo. But it just leaked and the prongs got stuck.


Please enter your comment!
Please enter your name here