The Voopoo Drag X Pro is the update to a confusing array of kits with a similar name…

drag x pro banner

For instance – there is the original Drag X, then the Drag X Plus and then recently the Drag X Plus Pro… my brain hurts…

More Details On The Voopoo Drag X Pro…

The good news here is that Voopoo have listened to the criticism regarding the output issues of previous models and also added some great updates.drag x pro features

Worldwide Shipping – Save 10% With Code ECC

The first of these which caught my eye is a manual switch which turns the mod on and off quickly – you can of course use the traditional 5 button presses but for speed the switch is a great feature.drag x pro switch

Secondly the other major upgrade is the use of the new GENE.FAN 3.0 chipset which can boost the output voltage up to 8.5V when required.

The output is specified at 5-100W using a single 18650 or 21700 battery – I imagine the 100W is only achievable with the 21700 installed.drag x pro battery

There are 3 user modes – Smart mode (where the device sets the output according to the coil installed), RBA mode (gives you full variable wattage control) and Temperature Control mode. To activate the TC mode you will need to download a firmware update from Voopoo.drag x pro modes

Activation is either manual from the fire button or you can also use auto draw fire when used with the included tank.drag x pro auto manual

The mod houses the airflow control system which gives a wide range of adjustment.drag x pro airflow

Talking of the tank this is the new TPP X pod – which uses the existing range of TPP coils.tpp x pod components

The kit includes the TPP-DM2 0.2ohm mesh and the TPP-DM3 0.15ohm mesh.drag x pro tpp coils

Included in the kit is the 510 base for the tank so you can use this on other box mods.

You can also use the PnP pod on this kit which is available separately allowing you to use the large range of PnP coils.drag x pro views

The filling port is located on the top of the tank with a button that allows you to rotate the top cap to fill.tpp x pod filling

There are 7 colours to choose from: California Orange, Classic Black, Garda Blue, Mystic Red, Sahara Brown, Sapphire Blue and Gobi Grey.

colours

Kit Includes

  • Voopoo Drag X Pro device
  • TPP X Pod
  • DM3 TPP 0.15ohm coil
  • DM2 TPP 0.2ohm coil
  • USB Type C cable
  • User manual

contents

Voopoo Drag X Pro Mod Specs

  • Size: 135x28x34mm (including tank)
  • Battery: 1×18650 / 21700 (not included)
  • Display: Colour screen – size not specified
  • Output: 5-100W (0-8.5V)
  • User modes: VW (RBA Mode) , Smart (Auto wattage), TC (enabled by firmware update)
  • Type C USB charging – 2.5A charge rate
  • Resistance range: 0.1-3ohm
  • Manual on / off switch
  • GENE.FAN 3.0 chipset
  • Auto / Manual fire modes

specs

Voopoo TPP X Pod Specs

  • Size: Not specified
  • Capacity: 5.5ml (standard) / 2ml (TPD)
  • Coil: TPP coil range, purchase PnP pod for use with PnP coils
  • Adjustable airflow
  • 510 base included
  • 810 drip tip
  • Top fill port

As upgrades go I really think this kit is a huge step forward offering improvements and some features which are popular on other kits currently.

Let me know what you think of the Voopoo Drag X Pro in the comments below!

My name is Michelle - I am 45 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again a few years ago and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod!

LEAVE A REPLY

Please enter your comment!
Please enter your name here