Introduction To The CB-80 Kit by Wismec
Today we are looking at the Wismec CB-80 Kit which comprises of the CB-80 mod and the Amor NS Pro stock coil tank.
The CB-80 is a single 18650, 80w max device that has various firing modes including VW, Bypass and TC modes.The Amor NS Pro Tank is a 2ml capacity, 22mm atomiser that can take a variety of coils. Two of which are included in the kit which are the WS04 MTL and WS01 Triple coil.
There are 5 colours to choose from, but today we will be looking at the rainbow/‘dazziling’ version.
This device was sent to us for the purposes of this review. As always, my opinions are honest and my own.
Wismec CB 80 Video Review
What’s In The Box
- Wismec CB-80 Mod
- Amor NS Pro tank
- WS atomizer heads
- USB cable
- Spare parts
- User manuals
- Battery – 1 x 18650
- Tank capacity – 2ml
- Atomizer resistance – 1.3ohm / 0.2ohm
- Output wattage – 1-80W
- Dimensions – 126mm x 36.4mm x 22.6mm
- Assembled weight exc. packaging (approx.) – 132g
Wismec CB-80 Kit Build Quality & Design
Amor NS Pro Tank
The Drip Tip:
The drip tip is 510 sized and in the popular ‘cobra resin’ or honeycomb style.
Top Fill Port:
The Amor NS Pro Tank is top fill, and to access the top fill part, just locate the little arrow.Then push the top of the tank sideways to reveal the port.
The Airflow Base:
On the base we have the airflow control ring. There is only one hole, but it provides perfect airflow for both direct lung and mouth to lung vaping. For direct lung I would recommend using the open airflow slot, and with mouth to lung, either of the airflow settings can be used depending on how tight you like your draw.
Amor NS Pro Tank – Overall:
Overall, the construction and look of this tank isn’t too bad. The only thing that pokes out is the size of the top fill hole. It could be a bit bigger. Other than that, no complaints!
The Wismec CB-80 Mod:
At the top of the device we have the 510 connector that is located toward the back side of the device. It has stainless steel threading and a 510 pin with a nice amount of throw to it! I would say you could fit 22mm atomisers on here, maximum.Working our way to the front of the CB-80, we have a square fire button that is slightly spongy, but does have a nice click to it.
Either side of the fire button, there is a little LED that lights up when firing the mod. I think that it’s a nice little touch and doesn’t stick out like a sore thumb, nor does it light up the room when vaping.Below that we have the screen which is nicely hidden behind some smoked glass.But once lit up, it is nice and easy to read and navigate.Underneath the screen are the + & – buttons as well as the micro USB charge port.On either side of the device we have the Wismec branding on the metal.At the back of the CB-80 there is a plastic grip with a honeycomb pattern on it. I think it looks awesome!At the base of the device we have the battery door that has the usual markings on it as well as venting holes in the event of a battery shorting out.On the inside of the battery door we have the negative contact which is clearly marked.
The Wismec CB-80 Mod – Overall:
Overall, The CB-80 is a lovely looking vape mod. All the buttons are in the right place and have a good feel to them. The screen is also very easy to read and navigate, which is a bonus, especially if you are new to vaping and are unsure about what you are doing. One thing that annoys me about the rainbow finish is that its a bloody fingerprint magnet!
Amor NS Pro Tank Coil Performance
WS01 Triple 0.2Ω Coil (40-80w)
The WS01 Triple is the direct lung coil included in the kit and I have found that it is best at anywhere between 48w and 50w for me. It offers the right combination of flavour and clouds as well as extending that battery life a little more.Even at wattages around 60 the flavour is pretty good, but I feel that the coils are struggling to wick as efficiently as they do at lower wattages.
WS04 MTL 1.3Ω Coil (8-14w)
The WS04 MTL is the mouth to lung coil that is included with the CB-80 Kit and from a visual perspective, it has reduced wicking holes and a smaller diameter coil in the centre.I have found that wattages around 10-12w was best for me. At higher wattages, I prefer to have the airflow wide open, as I feel that this gives better flavour. But at anything below 10w, you’ll be fine on either of the airflow options.
- Looks and feels good
- Well designed
- Good flavour
- Appeals to MTL and DL users
- Flavour diminishes at high wattage (WS01 Coil)
- Top fill hole a little small
- Device gets warm when chain vaping
Final Review Verdict
To round things off, I would say that the Wismec CB-80 is a great little kit for all types of vapers, but I feel that it is more aimed towards the new vapers due to it including MTL and DL coils. But, if you enjoy MTL or DL vaping, its pretty damn good!
Not really any major flaws or complaints about the CB-80 Kit. Just the odd bit and bob that I feel could have been done differently. Nice one Wismec!