The Asmodus Minikin 3S kit includes the new Minikin 3S mod and the Viento Sub Ohm tank.minikin 3s kit views

The Asmodus Minikin range have become firm favourites with a lot of vapers so the new 3S has some large footsteps to fill!

What does the 3S have to offer then?

The mod uses the GX0200-UTC chipset which is a new version and will require 2×18650 batteries for power.minikin 3s front rear

The maximum output depends on the user mode selected. In Variable Wattage and Curve mode the output is 5-200W. If you are using Temperature control the output is 5-120W.

There is a high definition colour touchscreen interface and also fingerprint recognition – so you can basically “lock” your device – handy when children or thieves are about!minikin 3 s screen

As mentioned above there are multiple user modes and the Temperature control mode is compatible with Ni200, Ti and Stainless Steel 304, 316 and 317.minikin 3s mod views

The kit includes the Viento Sub Ohm tank which also has a protective ring to help prevent damage.

The tank can also use the Smok Baby Beast coil heads and the capacity is 4ml.minikin 3s battery compartment

There are 6 colours to choose from – Black, Red, Green, Blue, Silver and White. However the Asmodus website is only showing the black version at the moment sadly!

Kit Includes

  • Asmodus Minikin 3S mod
  • Asmodus Viento Sub Ohm Tank
  • User Manual

Asmodus Minikin 3S Mod Specs

  • Battery: dual 18650 (not included)
  • Zinc alloy construction
  • Advanced GX-200 UTC chipset
  • Resistance Range: 0.1ohm-3.0ohm
  • Temperature Range: 212℉-572℉/ 100℃-300℃
  • Output: 5-200W (VW / Curve)  / 5-102W (TC)
  • Touchscreen HD colour screen
  • Modes: VW, TC (Ni200, Ti, SS316, SS317, SS304), Custom Curve, TCR, TFR
  • Fingerprint sensor
  • Firmware upgradeable
  • USB C port
  • Accelerometer
  • Compatible with Wireless Charging base

Asmodus Viento Sub Ohm Tank Specs

  • Size: 26.9mm diameter
  • Capacity: 4ml
  • Removable protective ring
  • Compatible with Smok Baby Beast coils
  • High quality Stainless Steel and Pyrex Construction
  • Sliding hinge top fill
  • Snakeskin pattern wide bore 810 Delrin drip tip
  • Adjustable bottom airflow

This is for sure a lovely looking kit – and I think the Minikin Fans will be happy!

Is the Asmodus Minikin 3S kit your next vape purchase? Let me know in the comments below!

Michelle

My name is Michelle - I am 48 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again around 2016 and have been interested in the topic ever since. I finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod and Bubblegum e-liquid! I have enjoyed writing for Ecigclick since 2017 and love being part of this great team! My passion for Tobacco Harm Reduction has also led me to becoming a Trustee for the NNA (New Nicotine Alliance) aiding in Advocacy

My name is Michelle - I am 48 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again around 2016 and have been interested in the topic ever since. I finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod and Bubblegum e-liquid! I have enjoyed writing for Ecigclick since 2017 and love being part of this great team! My passion for Tobacco Harm Reduction has also led me to becoming a Trustee for the NNA (New Nicotine Alliance) aiding in Advocacy

3 COMMENTS

LEAVE A REPLY

Please enter your comment!
Please enter your name here