The Blazar MTL Kit By CoilArt Previewed
The CoilArt Blazar MTL Kit consists of the Blazar MTL RTA and the semi-regulated Blazar Mod.
The reason why this is similar is because like the above devices this uses a single 18350 battery which is a lot smaller than your usual 18650.
Also like the above this is a semi-mechanical or semi-regulated mod. Basically it is a mechanical mod with an addition of a chip for extra protection. We tell you more about mechanical and regulated mods in our Guide To Mod Types.
The fire button is located on the side of the mod. I am not sure of the chip functions as often when a chip is fitted you get extra features such as a 5 click on and off and a battery indicator light.
At the base of the mod is the twist on adjustable battery cap which should be able to accommodate most 18350 batteries and adjust to compensate for any variations in total length.
Moving on to the RTA – this is a single coil build deck. Sadly I have no proper images showing the deck in its full glory – sorry about that!
You fill the RTA via the top fill cap which is also apparently childproof and leakproof.
At the base of the RTA is a 6 level airflow adjustment with various size airflow inlets to choose from.
There are 5 colours to choose from: Stainless Steel, Black, Resin Green, Resin Yellow and Resin Purple.
- CoilArt Blazar Mod
- CoilArt Blazar MTL RTA
- Spare glass
- Accessories bag
- User manual
CoilArt Blazar Mod Specs
- Size: 324x98mm (Including RTA)
- Battery: 1x 18350
- Chip protection
- 3-4.2V working voltage
- Resistance range: 0.15-3ohm
- Side mounted fire button
- Bottom adjustable battery cap
- Locking fire button
CoilArt Blazar MTL RTA Specs
- Capacity: 2ml
- Single coil build deck
- Slide top filling (childproof)
- 6 level bottom airflow
I think this is a lovely looking kit and although the 18350 batteries are low in power and capacity they should be fine with a high resistance coil installed.
What are your thoughts on the CoilArt Blazar MTL Kit? Let me know in the comments below!