The Hellvape Fat Rabbit Solo RTA is a new addition to the Fat Rabbit range.
What To Expect From The Hellvape Fat Rabbit Solo RTA?
So as the name suggests this version is designed for use with single coil builds.
Although the original Fat Rabbit RTA was suitable for single coils – this version has a different airflow design on the deck.
The original had 2 rows of airflow outlets below the coil whereas the Solo has a single row of slots.
The deck is pretty similar with 4 holes for the coil legs each with clamp screws.
The deck diameter is smaller at 25mm (compared to the 28mm of the original) but this is designed for single coil use so should still be plenty of space to build on.
As before you have two airflow inlets – side and bottom, you can adjust these and use both or either to suit your preference.
Capacity wise the standard version will hold up to 4.5ml of your own e-liquid or for TPD regulated areas this is reduced to 2ml.
To fill remove the 1/4 turn top cap to access the top fill ports.
The deck portion is the same and only requires a 1/4 turn (90°) to release.
The kit even includes a coil and cotton to get you started and a handy anti-condensation 810 drip tip.
Here is a brief introduction video from the Official Hellvape YouTube channel.
There are 7 colours to choose from: Stainless Steel, Matte Black, Matte Full Black, Gunmetal, Gold, Rainbow and Blue.
- Hellvape Fat Rabbit Solo RTA
- Bubble glass (not included in UK TPD edition)
- 0.37ohm Ni80 coil
- Coil cutting tool
- Shoelace cotton
- Accessory bag
- User Manual
Hellvape Fat Rabbit Solo RTA Specs
- Size: 25x55mm
- Capacity: 4.5ml (standard) / 2ml (TPD)
- 25mm postless single coil build deck
- Bottom and side adjustable airflow
- Top 1/4 turn fill cap
- 810 anti-condensation drip tip
This is a better size for most box mods as the original at 28mm would overhang on some mods.
Let me know your thoughts on the Hellvape Fat Rabbit Solo RTA in the comments below!