Hugo Vapor Asura GT228 Mod Preview – Removable Squonk System

The Hugo Vapor Asura GT228 mod is a clever 2 in 1 style mod.

The basics are that this requires 2×18650 batteries (not included) and will output up to 228W.

There is a 0.96 inch square OLED screen and you have Variable Wattage, Temperature control and TCR modes to choose from.

So that is the simple stuff – now it gets more complicated.

You can use this as a dual battery box mod with standard 510 fitting tanks.

Or you can convert this to use as a Squonk mod. Install the squonk system which fits onto the back of the mod.

Squeeze the squonk bottle and the liquid will flow through the hole on the back of the mod and then through the hollow 510 bottom feed pin. The BF pin is permanent – if using a standard atomiser with a solid 510 pin this will not be needed.

Due to the size of this fella you can use atomisers of 26mm and under without overhang.

There are 5 colours to choose from – Yellow, Purple, Blue, Red and Black.

Kit Includes

• Hugo Vapor Asura GT228 mod
• USB cable
• User manual

Hugo Vapor Asura GT228 Mod Specs

• Size: 88x46x50mm (With Squonk System) / 88x46x35mm (With Squonk System)
• Material : Die cast Zinc Alloy
• Battery: 2×18650 (not included)
• Detachable squonk system
• GT229 chipset
• Output: 228W max
• Display: 0.96in OLED Square screen
• No overhang with 26mm atomisers
• Resistance range: 0.06-3ohm
• Temperature range: 200-600°F / 100-315°C
• Modes: VW / TC (Ni, Ti, SS) / TCR /Clock
• Firmware upgradeable

This could be a versatile mod – if using a tank and want to keep it lightweight remove the squonk system part. If using a dripper attach the squonk system and away you go!

Would you find a 2 in 1 mod like the Hugo Vapor Asura GT228 useful? Let me know your thoughts in the comments below!