The Tesla Invader GT Kit is a different type of pod kit with more options than you can usually find.
As you can probably see the styling and features are based on the popular Invader range of mods including the Invader 4 and Invader 4X.
Looking Closer At The Tesla Invader GT Kit…
The Invader range have a reputation for being rugged mods with simple controls. Usually they have a Variable Voltage dial and are semi regulated.
The pod version is very similar. Although a lot smaller!
Inside the pod is a 1200mAh internal battery. Apparently you can charge this fully in 1.4 hours at a 1A charging rate via the USB Type C port.
Output wise this will output between 7 and 50W. But there is no screen. What you do get is a dial with 5 settings on – which mimics the VV dial on the bigger versions. So at a glance you can see what mode you have set.
Below the dial is a switch with 3 positions. This is to select how you fire the device. You can choose between auto inhale fire, pressing the fire button or a combination of both.
An LED indicator informs you of the battery capacity remaining.
Looking at the pod now – this is removable and refillable via the side fill port.
I am not sure if you can change the coils or if they are fixed. The Tesla website is a bit vague. However there are plenty of coil options and the fact there is a RBA coil means they might be replaceable. The coil options are:
- T-P1 Mesh 0.2ohm coil
- T-P2 Regular 0.6ohm coil
- T-P3 Mesh 0.8ohm coil
- T-P4 Mesh 0.3ohm coil
- RBA-P1 DIY rebuildable coil
The pod is secured in the device magnetically and you can rotate the mouthpiece to the angle you feel comfortable.
There are 12 colours to choose from: Blue, 7-colour, Black, Golden, Red, Stainless Steel, Orchid Realm, Fire Phoenix, Blue Phoenix, Firyland, Sea of Desire and Ice Fire Phoenix.
Kit Includes
- Kit contents not stated
Tesla Invader GT Kit Specs
- Size: 68x43x19.1mm (device) / 42×37.5x15mm (pod)
- Output: 7-50W (5 settings)
- Battery: 1200mAh (internal)
- Display: LED indicator / dial
- E-liquid capacity: 3ml (standard) / 2ml (TPD)
- Pods: Refillable, replaceable coil (?)
- Coil options: 0.2ohm Mesh, 0.6ohm Regular, 0.8ohm Mesh, 0.3ohm Mesh and RBA options
- 1.4hour 1A type C charging
- Mode switch – Auto draw, auto or button fire or just button fire selection
The styling and features of this kit so far look great! I wish there was a bit more detail on kit contents and type of coil / pod.
Let me know what you think of the Tesla Invader GT Kit in the comments below!
