The Gaea 200W Mod By Ultroner Previewed
It is not very often I find a Stabwood mod to be sexy, but in certain colours this Ultroner Gaea 200W mod is flipping gorgeous!
For those who are not sure what Stabwood is – basically it is wood which has been treated with a stabilising solution – usually resin based. Also the resin can have colour added which creates (sometimes) some very pretty patterns.
Plus with Stabwood each device is unique as the pattern is as natural as the wood it is based on. That usually makes Stabwood mods pricey too – which is sadly still the case here.
Anyway let’s have a look at what lurks beneath the beautiful exterior!
The mod uses 2×18650 batteries which as usual are not included. Power-wise this will output between 5 and 200W.
Nestled within the stainless steel control panel is a screen but sadly I have no details on this as to size or if colour. The Gaea is not listed on the Ultroner website – instead Ultroner direct you to another vendor site which has very limited info.
Well as for the colour there are tons to choose from – obviously all unique as this is a natural product. But there are shades of Green, Yellow, Red and Blue – a few samples shown below.
- Ultroner Gaea 200W Mod
- USB cable
- User manual
Ultroner Gaea 200W Mod Specs
- Size: 45x91x39mm
- Output: 5-200W
- User modes: VW, TC
- Battery: 2x 18650 (not included)
- Resistance range: 0.1-3ohm
- Temperature range: not specified
- Display: Screen – size not specified
- Material: Stainless steel and stabilised wood
- Chipset: Sevo-200X
Yep this is rare – I usually find a lot of Stabwood mods to look a bit too “busy”. But some of these are gorgeous.
Will you be buying the Ultroner Gaea 200W mod? Let me know in the comments below!