The Vaporfi VAIO Go vape pen starter kit comes with both a direct to lung and mouth to lung coil making it a perfect choice for newcomers to vaping.

VAIO pen kit

The US based company has a track record of producing high quality vape kits such as the V-Grip – the VEX 150 and Vex 75 plus many more and of course VaporFi e-liquids are very tasty indeed.

I recently reviewed the VAIO Mini – the baby brother of this one – and actually surprised myself by liking it.

Is It All Vaping Systems GO With The Vaio Go Vape Pen Set-Up by Vaporfi?

So how does the VAIO all in one MTL and DTL vape pen kit stand up against the smaller version?

Could this be one of the best vape pens for e liquid we have tried? Let’s take a look.

This was sent to me direct from VaporFi – thank you – for the purpose of this review and as always my thoughts and opinions are my own.

Inside the Box

The usual fresh and functional packaging and inside you’ll find:

  • 1 VaporFi VAIO GO All-In-One Pen
  • 1 VaporFi VAIO GO 0.5 Ohm Atomizer
  • 1 VaporFi VAIO GO 1.5 Ohm Atomizer
  • 1 VaporFi VAIO GO DTL Mouthpiece
  • 1 VaporFi VAIO GO MTL Mouthpiece
  • Quick Start User Guide
  • 1 USB Cablevaio go contents

Specs and Features

  • 22mm Diameter
  • All In One Design
  • Compact and Ergonomic Pen
  • 3mL Vape Juice Capacity
  • Top Fill Design
  • 2000mah Battery Capacity
  • Maximum Output Current: 14A
  • Maximum Output Voltage: 5.5V
  • Resistance Range: 0.3 – 2.0 Ohms
  • Low Voltage Protection
  • 15 Second Protection
  • Short Circuit Protection
  • Micro USB Charged

Quick Start Guide

Easy coil change…

vaio go coil swap

  • X3 clicks of the fire button for on and off
  • Remove tank to replace and screw in the coil [prime first!]
  • Press fire button and release to vape
  • Power Indication LED Lights:
  • Green: 100% Battery Life
  • Yellow: 50% Battery Life
  • Red: 25% Battery Life and Under

Key Features

As you might expect from an AIO [all in one] device simplicity is key here.

This really is a fill and go vape kit hence the name I guess.

Out of the box neither of the MTL or DTL coils are installed – so depending on what style you vape choose the coil to match.

vaio go coils

The 0.5ohm is for sub ohm vaping and obviously the 1.5ohm is for mouth to lung – how they perform I’ll get to in a moment.

The Vaporfi VAIO Go is powered by a very respectable 2000mAH battery and there are no settings or screen to worry about – the chip recognises the resistance of the coil and adjusts automatically.

There’s a very generous airflow that is mirrored on both sides.

vaio go airflow

At just 3ml capacity sub ohm vapers may find themselves filling often however it’s more than enough for MTL vapers – fill to the unobtrusive max fill line to avoid flooding your tank.

The kit includes x2 drip tips one each for both vaping styles.

Design and Build Quality

Given I’ve reviewed pretty much all of the current VaporFi products you’ll know from past reviews the build quality is 99.999% of the time superb.

The same goes for the VaporFi VAIO GO it really is beautifully machined.

The tank unscrews with butter like threads as does the airflow ring which has just the right amount of resistance and has a stopper.

vaio go

Design wise – and I use the word stylish a bit too much lol – is shall we say ‘contemporary’ in that it looks bloody gorgeous.

Another thing I say a lot is there’s not much designers can do to make a pen style vape kit stand out from the crowd.

The design here is simple but stunning – clean – elegant and the metallic colours are sharp very modern with a wonderful finish to them.

It really is an eye catcher and I’m loving the subtle green version I’ve received.

vaporfi logo

There’s also a refreshing lack of over the top branding or fancy logos with the VaporFi name subtly etched into one side and towards the bottom of the battery – like I said very cool and contemporary.

It’s very lightweight to hold and at just 22mm it fits nicely in your pocket or bag – it is rather long though.

How Does the VaporFi VAIO GO Perform?

1.5Ohm Coil

OK I began with the MTL 1.5ohm coil with the black MTL drip tip- smaller bore – the other slightly wider being stainless steel.

The coil was fully primed and had sat in the juice for a good 10 minutes – I was using a 50-50 VG/PG tobacco e-liquid from Black Note and one I use every day so I know the taste very well indeed.

Unlike a few recent MTL tanks I’ve reviewed the break in time for the coil was about half a tank before I got a decent flavour – however the longer I had this coil on the go the flavour improved.

fill vaio go

Longevity wise I began using this on New Year’s Day and the coil still has a freshness about it.

Turning the airflow almost closed gave an extremely tight vape and I found a happy medium with it about a third open for my preferred vape.

Not bad at all!

Sub Ohm Vaping On The VAIO Go With The 0.5Ohm Coil

I popped in the 0.5 Ohm with a high VG e-liquid – again a flavour I vape regularly so know very well indeed from Wick Liquor.

With a clean tank I followed the same procedure of priming the coil and leaving it to sit.

First vape was nothing to write home about however after a couple of puffs to get things moving I was very pleased with both the vapour and most importantly the taste.

vaio go in hand

Whilst the taste wasn’t as crisp and deep as say the Uwell Crown III – and given I rarely, if ever, use stock coils these days – it was more than passable – indeed very good!

The clouds were a surprise too with thick and dense aromatic vapour that hung around a while – excellent stuff.

Check out our recommended Sub Ohm E Liquid.

What I Like

I like the overall design – those colours are stunning – and the simplicity of use – one click is as easy as it gets.

The flavour is very good and as good as any stock coil sub ohm tank I’ve reviewed – saying that it’s not in my top five all timers but certainly good enough for a top ten.

Vapour wise you can’t fault it though I wouldn’t mark this as a cloud chucker it certainly delivers respectable clouds if that’s your kind of thing.

And this is one of those kits that says it can switch between MTL and DTL and actually can – so a great investment that will take you through both styles should you wish too try either/or.

It’s a great price too!

smok stick v8 comparison

What I Don’t Like

It is a little long – though saying that I was convinced it would tower above the SMOK Stick V8 – but it really is just a touch smaller – must be some kind of optical illusion!

3ml capacity for the tank means that in sub ohm mode you will be re-filling a lot – but us vapers in the UK are used to 2ml – but still when out and about take a bottle with you!

Final Review Verdict

I like the Vaporfi Vaio Go a lot.

The colours are quite lovely as is the contemporary design – it’s certainly a looker especially with the sub ohm stainless steel drip tip on top.

Flavour is excellent as are the clouds and it’s dead easy to use.

This is an ideal kit for a brand new vaper who can try both MTL [similar draw as smoking] and sub ohm vaping without breaking the bank.

I think VaporFi has a real hit on their hands with this one.


  • Simple to use
  • Great flavour
  • Decent clouds
  • Colour options
  • Good battery longevity


  • Only 3ml capacity
  • A little long
Build Quality
Ease of Use
Liklyhood of Buying Again if Lost or Damaged
I have simpler vape tastes these days - I never leave home without a Caliburn G, a Vaporesso Luxe 40 or Innokin EQ FLTR and a CBD vape pen or bottle of CBD drops in my rucksack...or indeed an Aspire Nautilus Prime X in my pocket... At home I'll be using various mods topped with the GeekVape Zeus X RTA or the Signature Mods Mono SQ topped with the Augvape BTFC RDA... I'm a former journalist and now a writer and sometimes author... I'm ex Army - adore dogs and never happier than hiking over the hills or with a good book on a beach.


  1. Great review. I’ve been looking at this kit. The style and colors caught my eye. Glad to know it’s a good choice. Thank you..


Please enter your comment!
Please enter your name here