The Wismec R40 Kit is the smaller sibling of the recent Wismec R80 kit.
The styling is very similar to the R80 kit however the R40 uses an internal battery.
What To Expect From The Wismec R40 Kit?
As mentioned above the R40 has an internal 1700mAh battery which is charged via a USB Type C port in around 1.5 hours at a 2A charging rate.
The output is variable up to a maximum of 40W.
A 0.96in colour OLED screen is mounted on the side with a 3D style display.
Following on from the Triangular design featured on some of the Reuleaux mods the R40 has a similar shape with a honeycomb grill panel.
The pod part of the device is refillable with replaceable coils.
The coils are also compatible with the R80 and include the WV01 Single 0.8ohm wire coil, the WV-M 0.3ohm Mesh and the optional RBA coil.
On the base of the coil is an adjustable airflow control ring.
Located on the side of the pod is the refill port and the pods will hold up to 3ml of e-liquid as standard, however these will be reduced to 2ml for TPD regulated areas.
Here is a brief introduction video from the Wismec YouTube channel.
There are 5 colours to choose from: Ruby, Sapphire, Black, Silver and Silver/Black.
- Wismec R40 mod
- R40 pod
- WV-M 0.2ohm coil
- WV01 Single 0.8ohm coil
- USB C lanyard cable
- User manual
R40 Kit Specs
- Size: 96×27.4×27.4mm
- Output: 40W max, VW
- Battery: 1700mAh (internal)
- Display: 0.96in colour OLED screen
- E-liquid capacity: 3ml (standard) / 2ml (TPD)
- Pods: Refillable, replaceable coil
- Coil options: WV range and RBA
- Type C USB – charging rate not stated – 1.5 hour charging time
- Adjustable airflow
- Smart wattage selection
It sure is a looker and the RBA coil option does make this a versatile little device.
Let me know your thoughts on the Wismec R40 Kit in the comments below!