The Wotofo MDura Kit might sound familiar – this is the sibling of the recent MDura Pro.
The name is not the only similarity – but design wise the styling is very different…
More Details On The Wotofo MDura Kit…
The kit consists of the MDura box mod and the NexMini Sub Ohm tank.
Unlike the MDura Pro kit this is not IP rated – no mention of being waterproof, shock or dustproof?
Also as you can see the styling is different with a smaller 0.96in screen located on the panel at the side of the mod rather than the larger screen on the Pro version.
The brain of the mod is the NexCHIP which is also used on lots of other Wotofo devices and provides a fast firing speed and plenty of user protections.
You will need 2×18650 batteries to power the mod (although there is an error on the Wotofo website saying only 1 battery in the specs).
Output wise you get 5-200W and there only seems to be a Variable Wattage mode available.
A Type C USB port is provided with a 2A charge rate.
The kit tank is the NexMini sub ohm tank which uses the D range of coils.
You get the D43 Clapton Mesh and D41 A1 NexMESH coils included in the kit.
There is also the option of a D42 Net Mesh 0.2ohm coil and D44 Dual NexMESH 0.15ohm coil available separately.
If you are into rebuilding the SMRT V8 Baby rebuildable coil kit also from Wotofo is compatible with plenty of mesh options to choose from.
Or there is a RBA deck you can install too.
A slide fill cap takes care of refilling with a child-lock port valve also available.
On the base of the tank is the airflow control ring to allow you to adjust the incoming airflow to your preference.
There are 4 colours to choose from: King Kong Black, King Kong Blue, King Kong Red and King Kong Orange.
Kit Includes
- Wotofo MDura mod
- NexMINI Sub Ohm tank
- USB Type C Cable
- D43 Clapton Mesh coil (installed)
- D41 A1 NexMESH coil
- Accessory bag
- Spare glass
- User manual
Wotofo MDura Mod Specs
- Size: 87x52x26mm
- Battery: 2×18650 (not included)
- Display: 0.96in TFT colour Screen – 6 colour themes
- Output: 5-200W
- User modes: VW
- Type C USB charging – 2A charge rate
- Resistance range: not specified
- NexCHIP chipset
Wotofo NexMINI Tank Specs
- Size: 25×32.85mm (without drip tip and 510 pin)
- Capacity: 3.5ml (standard straight glass) / 4.5ml (standard bubble glass) / 2ml (straight glass TPD) / 4.5ml (bubble glass TPD)
- Coil: D Coil range
- Slide top fill cap
- Bottom honeycomb adjustable airflow
So this seems to be the more basic version of the Mdura Pro kit – with a smaller screen, less user modes and lower output. I think the naming will confuse many people though.
Let me know what you think of the Wotofo MDura Kit in the comments below!
