The asMODus Ultroner EOS II mod is a thing of beauty!
This is another design collaboration between asMODus and the company Ultroner who were found in 2016 and mainly design stab wood devices.
Stab wood is a natural wood which has been treated with a solution to stabilise it and also enhance the pattern. Often a resin treatment is used which adds colour and shine.
The EOS II has a colour touch screen which is a capacitive type and you can swipe left or right to change modes. Also you can upgrade the firmware and add different screen displays.
Maximum output is 180W from 2×18650 batteries (not included). There are 3 firing modes – Soft, Normal and Hard to customise how rapidly and intensively the power is supplied to the 510 connector.
asMODus say this mod can accommodate tanks of up to 26mm in diameter without overhang. Their recent Asmodus .Blank RDA would be a beauty of a pairing.
The chipset is the GX-180-UTC which is similar to that used in the EOS 180W and the Minikin V2.
There are 3 colours to choose from – Green, Blue or Purple – but obviously with stab wood the shades and patterns will vary.
- asMODus Ultroner EOS II mod
- Velvet carry bag
- Wood buffering tool
- User manual
asMODus Ultroner EOS II Mod Specs
- Battery: 2×18650 (not included)
- IPS colour Capacitive touchscreen
- Full stab wood body with Aluminium frame
- Firmware upgradeable
- Chipset: GX-180UTC
- Modes: Soft, Normal and Hard
- Output: 180W max
- Accommodates tanks up to 26mm
- Resistance range: 0.1-3ohm
What a pretty mod and seems to have a lot of user friendly features too. However you will be paying for the luscious stab wood finish as this is not a budget priced mod.
Would you spend big to buy the asMODus Ultroner EOS II mod? Let me know what you think in the comments below!