The Cthulhu Artemis MTL RTA is a new release tailored for MTL vapers…
What Is New On The Cthulhu Artemis MTL RTA?
This is a rebuildable atomiser so you install your own coils and wicking onto the build deck.
The deck has a two post design with asymmetric posts to take into account the direction of the coil legs.
Below the coil is the airflow outlet pin. You can change the size of this pin by adding or removing the inserts included in the kit – they range from 1mm up to 2mm. Without a pin installed the airflow outlet is 2.7mm diameter.
You can remove and replace the airflow outlet pins without removing the coil.
To add to the airflow options provided by the outlet pin – there is an airflow inlet adjustment ring provided on the base of the tank. Using both airflow systems there are up to 25 different airflow combinations.
The capacity is stated as 2.4ml but this might be reduced to 2ml if this is available in TPD regulated areas.
Here is an introduction video from the Cthulhu YouTube channel.
There are 2 colours to choose from: Black and Stainless Steel.
- Kit contents not specified
Cthulhu Artemis MTL RTA Specs
- Size: 22x35mm (not including drip tip)
- Capacity: 2.4ml
- Tight and loose MTL airflow – 25 airflow combinations
- Asymmetric coil posts
- Airflow ring adjustments – 0.8/1.2/1.6/2/2.7mm
- Under coil air outlet pin – 1/1.4/1.8/2mm (remove pin for 2.7mm setting)
- Replace air outlet pin without removing coil
This looks a nice simple RTA plus with all the airflow options you should be able to easily find the perfect set up for you.
Let me know what you think of the Cthulhu Artemis MTL RTA in the comments below!