The M VV II Mod By Dovpo Previewed
The Dovpo M VV II mod is the second edition of the back to basics M VV mod.
This is a regulated mod – you have some control over the output and also lots of protection features but with the simplicity of a mechanical mod. I tell you all about the different types of mod in my guide to Mechanical V Regulated mods.
The back to basics approach harks back to the days of early box mods where people started adding potentiometers to simple mech mods to vary the output. A potentiometer is a variable resistor to restrict the output to levels you choose.
Both versions of the M VV have a potentiometer and you can adjust between 1 and 8V output.
Obviously the actual output will depend on your battery performance and the coil you have installed.
Talking of batteries you will need 2×18650 batteries which are not included. You access the battery compartment via the removable side panel.
Even though this has a simple voltage control you still get an LED indicator to display the battery capacity remaining.
The protections available are:
- Low voltage
- Overtime (prevents overheating when fire button held down for extended periods)
- Polarity (if batteries incorrectly installed)
There are 3 styles to choose from: Hannya, Dragon Samurai and Skull & Roses.
- Dovpo M VV II mod
- USB type C cable
- User manual
Dovpo M VV II Mod Specs
- Size: 91x53x27mm
- Display: LED indicator
- Output: 1-8V Variable Voltage dial
- Battery: 2×18650 (not included)
- Resistance range: 0.08-3.5ohm
- Material: Zinc Alloy and PC
- Protections : Low Voltage, Overheat, Overtime and Polarity
- USB Type C charging
- Removable battery cover
I know the original M VV and the Dovpo Vee had a lot of fans due to their simplicity and sheer output power. So hopefully this update will deliver the same.
Will you be buying the Dovpo M VV II mod? Is it the back to basics mod you need? Let me know in the comments below!