The iJoy Luna 2 pod kit is the update to the iJoy Luna kit.
What Is New For The iJoy Luna 2 Pod Kit?
There have been a few great upgrades for the Luna 2 – the first is that the battery capacity has increased from 350mAh to 650mAh.
You still get a USB Type C charge port with a 1A charge rate and the device is controlled by the UNIV.Mini chipset with plenty of protections.
Auto draw activation is provided for a button free operation.
Also upgraded is the output which has gone from 11W to 16W which also matches up with the lower resistance pod coil.
As with the original the pods have fixed coils so when the coil performance has deteriorated you dispose of the pod – no messy coil changes to contend with.
The original pods had a 1.1ohm resistance but these have been replaced with the new 0.8ohm mesh pod.
The fill capacity has increased massively from 1.4ml to 3ml on the standard Luna 2 Kit. For TPD regulated areas this is likely to be reduced to 2ml.
There are 4 colours to choose from : Red, Green, Blue and Black.
- iJoy Luna 2 mod
- Luna 2 Pod
- USB Type C cable
- User manual
iJoy Luna 2 Pod Kit Specs
- Size: 12.5×22.5x109mm
- Output: 16W / 3.6V
- Battery: 650mAh
- Capacity: 3ml
- Display: LED indicator
- Resistance range: Not specified
- USB Type C port – 1A charge rate
- Pods: Refillable, fixed coil
- Coils: 0.8ohm Mesh
- Side fill port
- Draw activated fire
- UNIV.MINI chipset
Some great improvements here which should hopefully make this a great starter kit.
Let me know your first impressions on the iJoy Luna 2 pod kit in the comments below!