The Mechlyfe X Fallout Vape X MrJustRight1 Paramour Mod is a sexy new SBS (Side By Side) box mod which seems to have a lot of fingers in the same pie!
Mechlyfe are manufactures of high end vape gear including the Ratel Pod Mod and the Slatra RDA.
MrJustRight1 was involved in the design of the successful Wotofo Profile RDA and the Dovpo Ohmage Sub Ohm Tank.
Fallout Vape are a new one to me but they have previously worked with Ultroner on the Gaea 200 mod.
What To Expect From The Paramour Mod…
So as you can see this has a SBS format where the battery sits in a tube and the atomiser is located to the side of it on a lower level platform.
You can use a single 21700, 20700 or 18650 battery in here – the height of the mod will change depending on the battery type used.
The output is rated as 5-80W or 0.5-8V. You can select from Variable Wattage, Variable Voltage, Bypass and Temperature control user modes.
A USB Type C port is included for emergency recharging, although it is stated as having “quick charge” capability the actual charge rate is not specified.
Below the atomiser platform are the fire and adjustment buttons plus a OLED screen – but the size has not been specified at present.
A spring loaded 510 connector is provided and due to the shape of the battery compartment you are limited to using atomisers with 25mm diameter or less.
The body is made from 304 Stainless Steel and Aluminium and the battery tube has a knurled pattern.
There are 3 colours to choose from: Black & Silver, Grey & Black and Limited edition (10 pieces) Red & Gold.
Kit Includes
- Paramour Mod
- USB Type C Cable
- User manual
Paramour Mod Specs
- Size: 26x52x76mm (21700 / 20700 battery), 26x52x71mm (18650 battery)
- Output: 5-80W / 0.5-8V
- User modes: VW, VV, Bypass, Temperature Control (Ni, Ti,SS)
- Battery: 1x 21700, 20700 or 18650
- Display: OLED screen – size not stated
- Resistance limits: 0.05-3.5ohm
- USB Type C charging
- Compatible with up to 25mm atomiser diameter
- Body materials: Stainless Steel and Aluminium
- Spring loaded 510
This sure is sexy, such a shame the design limits the size of the atomiser to 25mm or less, but the full function user modes should make up for that!
Let me know what you think of the Mechlyfe X Fallout Vape X MrJustRight1 Paramour Mod in the comments below!
Is it have smart chip, that give resistance and watt or volt suggestion?
Not from what I can see sorry – it appears to have VW, VV, Bypass, TC (Ni, SS, Ti). It should display the coil resistance but you will have to select your own power level.
Finally a 21700 sbs! Love this style of mod, but using 18650’s makes me sad…