The OFRF nexMESH sub ohm tank is from a new company formed in August 2018 and introduced to the world in October of the same year. Not long after that the OFRF Gear RTA was released.

nexMESH Sub Ohm Tank Banner

Then they released their nexMESH as a stand-alone product and in conjunction with the WOTOFO Profile Unity RTA

The nexMESH sub-ohm tank by OFRF

As I mentioned earlier, OFRF are a relatively new company so putting a sub-ohm tank out on the market with so many out there already was a pretty bold move, especially considering there are some really top quality performers.

The tank certainly puts itself out there to be a top quality sub-ohm tank with its main selling point being its Conical Mesh coils. It comes in at 25mm in diameter with adjustable tri bottom airflow.

After a lot of hype we ask the question. Is it all that?

Let’s take a look.

The OFRF nexMESH sub ohm tank was sent to me direct for this review. As always, I will give you my own, honest opinion of this product after a lengthy testing period.

What’s In The Box

  • OFRF nexMESH sub-ohm tank
  • 0.2ohm A1 Mesh Coil (Pre-installed)
  • 0.15ohm S316 Mesh Coil
  • Bubble Glass
  • User Manual
  • O-Rings
  • Sticker
  • Coil Explanation Card

OFRF nexMESH Box Contents

Features

  • Size: 25 x 40.5mm
  • Material: Stainless Steel
  • Slide top fill with rubber membrane
  • Capacity: 4ml / 5.5ml (bubble glass)
  • nexMESH Conical Coils
  • Shock resistant PCTG tube (Glass)
  • Adjustable Tri bottom airflow

OFRF nexMESH Sub Ohm Tank Specs

Build Quality & Design

The OFRF nexMESH Sub Ohm Tank is well made on the whole. There was no residual machine oil, sharp edges or burrs to be seen anywhere.

The threads, however, are a little gritty and crunch a little when you are unscrewing the tank.

The airflow control ring at the bottom of the tank is a little different from most being that it has three air inlets rather than the normal two.

OFRF nexMESH Sub Ohm Tank In Hand

The design is pretty much what you would expect from a sub ohm tank, except for a few points.

After a while, because of the way the drip tip chamfers off at the bottom, residual e-liquid/condensation builds up and must be wiped away every few hours.

OFRF nexMESH Sub Ohm Tank Eliquid around drip tip

Also, the drip tip is quite loose and any other 810 drip tips you care to put in its place have the same loose connection. This can easily be remedied by a bigger o-ring.

One other design fault, in my opinion, comes if you are using a larger chubby bottle to fill the tank up with.

You have a great problem either getting the nib of the bottle in the juice hole or you have to remove the drip tip to get it close enough to get the tip of the bottle in to fill up the tank.
OFRF nexMESH bottle closeAlso, when you go to slide across the top cap to reveal the fill port, mine required a lot of pressure to actually open it up.

The tank comes in six colours, Black, SS, Gun Metal, Sapphire Blue, Gold and Spectrum. Right off the bat there’s pretty much a colour for every taste.
OFRF nexMESH Colours

How Does the OFRF nexMESH Sub Ohm Tank Perform?

Whilst there are some bloody good sub-ohm tanks out there, with some recent releases standing out, I was expecting the nexMESH tank to be an excellent performer. Up there with the best in its class.

Especially knowing how good their nexMESH performs and the highlight of the coil system being conical.

Before we get onto the performance though, first let’s take a quick look at the filling and coil change functions.

How To Fill The OFRF Sub Ohm Tank

To fill the tank:

  • Simply slide the top cap across at the arrow
  • You are met by a small fill port covered with a rubber membrane, so the e-liquid doesn’t leak out.
  • Carefully fill tank
  • Let sit for 10 minutes for the juice to soak into the cotton

OFRF nexMESH Fill Port

Leak Resistant Silicone Fill Port

I tested to see if this fill port was leak resistant as claimed. I’m pleased to say, if the tank is tipped upside down with the top cap open, the e-liquid doesn’t empty all over, pretty impressive!

How To Change Coils in the nexMESH tank

Changing your coils out is a pretty simple process.

  • Unscrew the bottom of the tank
  • Pull out the old coil and press firmly home the new coil
  • Screw back the bottom of the tank and away you go.

OFRF nexMESH coil insertion

Included Coils

The coils for the OFRF nexMESH sub ohm tank are touted as being pretty special. They aren’t just any old coil, oh no.

Firstly they are mesh, that isn’t a biggie in this day and age as most brands utilise mesh now.. BUT, the difference with the OFRF coils is that they are “Conical” no less.
OFRF nexMESH Sub Ohm Tank Coil Shape
Now, whilst the coils looks amazing I’m also expecting them to be something special.

OK, so there are two nexMesh coils in the kit.

A1 0.2ohm nexMesh Conical Mesh Coil

The A1 0.20ohm coil is pre-fitted and OFRF recommend you use these coils between 75w and 85w for maximum performance.

OFRF say:

Looking for a powerful, warm throat hit with massive vapor and amazing flavour, then this coil is for you. Featuring a slightly thicker mesh weave and operating at resistance of 0.20ohm this coil delivers amazing flavour profiles at between 75w – 85w,

SS316L 0.15ohm Conical Mesh Coil

This coil comes as a spare in the box.

OFRF say:

Prefer a smoother, softer sub-ohm experience that still delivers a massive flavour hit then the nexMESH stainless steel conical mesh coil is the right choice for you.

Ideal for those of you who prefer temperature controlled vaping the nexMESH SS has a resistance of 0.15ohms and delivers amazing flavour profiles without the risk of a dry hit at between 350F-540F/180c-280c.

Don’t have a temperature control Mod? Simply set your wattage control between 55w-75w and experience the silky smooth flavour of your favourite juice.

Flavour | Cloud

I used the same vape juice with both coils, a 65VG/35PG mix from Future Juice.

I was getting a little more flavoursome vape from the SS316L coil over the A1 coil but only just.

Both the coils for me broke in at around ¾ of a tank and the flavour started to drop off at a little over a week and a half.

The A1 coil was used of upwards of two weeks where it could have had a little more life left.

It has to be said, I was expecting the OFRF nexMESH sub ohm tank to blow me away. I really wanted it to blow me away. OFRF told me it was special. It has conical coils so it would be special right? Wrong!

As previously mentioned, the SS316L provided me with the better flavour on this occasion. I still wasn’t blown away though.

I would put the flavour at above average at best. My go to sub ohm tank is the Freemax Mesh Pro and the flavour from the OFRF sub ohm tank was a couple of notches below that for me.

As for cloud. Whilst the SS coils provide decent vapour production, the A1 coils are certainly the cloud chuckers out of the two.

Wicking | Dry Hits

I rarely prime my coils and just put the e-liquid in the tank and leave it to stand. Even without priming the coils I was able to start vaping within a couple of minutes and both coils had no problem at all staying moist even when chain vaping.

OFRF have a dual layer of cotton on the coils so this would certainly help with keeping the cotton wet at all times. So no dry hits here even under heavy use.OFRF nexMESH Dual Cotton

Pros

  • Pleasant looks
  • Easy changeable coils

Cons

  • Average Flavour
  • Super tight top slide action
  • Moisture under the drip tip
  • Crunchy threads
  • Poor O Ring for the drip tip
  • Difficult to fill with certain bottles

Final Review Verdict

I felt massively let down by the OFRF nexMESH tank. For something that was touted as different and special this was, for me, just a bit meh..

Whilst I’m certainly not saying it’s a bad sub ohm tank, it’s certainly nothing special and there are a few sub-ohm tanks out there on the market that, for me, are better.

Did you buy the OFRF nexMesh sub ohm tank? What did you think? Let us know in the comments below!

neash vape vape reviewer
Neash Vape

Hello all. My name is Ian and I'm a 47 year old Care Worker, husband and father. My Youtube Vape channel was started in 2018 and has 81,000 views and counting. I started my vaping lifestyle back in 2014 when me and my wife both decided to pack in the cigarettes. It wasn't an easy task at first as I had smoked since the age of 15, so, that would make nearly 30 years on the dreaded cigarettes. After around six months switching between cigarettes and vaping, I finally kicked the habit and became a full time vaper. Vaping is a way out of smoking, not only does it save you money, it may, one day, save your life. For anyone wanting to stop smoking cigarettes, all I would say is stick with it. Nothing in life comes easy, believe me when I say, you will soon start feeling the benefits both in monetary terms and above all, feel healthier. Happy vaping

REVIEW OVERVIEW
Build Quality
7
Design
7
Flavour
6
Cloud Production
8
Ease of Use
7
Hello all. My name is Ian and I'm a 47 year old Care Worker, husband and father. My Youtube Vape channel was started in 2018 and has 81,000 views and counting. I started my vaping lifestyle back in 2014 when me and my wife both decided to pack in the cigarettes. It wasn't an easy task at first as I had smoked since the age of 15, so, that would make nearly 30 years on the dreaded cigarettes. After around six months switching between cigarettes and vaping, I finally kicked the habit and became a full time vaper. Vaping is a way out of smoking, not only does it save you money, it may, one day, save your life. For anyone wanting to stop smoking cigarettes, all I would say is stick with it. Nothing in life comes easy, believe me when I say, you will soon start feeling the benefits both in monetary terms and above all, feel healthier. Happy vaping
ofrf-nexmesh-sub-ohm-tank-reviewI would say it’s a decent effort from OFRF but sometimes things can get a little over complicated, something simple would have done a far better job. The conical coil is a nice concept but there are far better “normal” coils out there way out performing these by OFRF.

3 COMMENTS

  1. I love this tank, but when I switched to the SS coil, I found I was only getting a single fire with my Smok Alien mod, rather than the continuous fire I got from the A1. Do you know if this is normal? Or is the coil faulty? I’d press the fire button and only get a single puff before it stopped firing. With the A1 coil I was able to draw for as long as I liked.

  2. “I was getting a far more flavoursome vape from the SS316L coil over the A1 coil but only just.”

    Far more or only just. Which is it?

LEAVE A REPLY

Please enter your comment!
Please enter your name here