VSticking VKsma Kit Preview – YiHi Auto-Squonking Round 2!

The VKsma Kit By VSticking Previewed

The VSticking VKsma Kit is an auto squonk kit with a YiHi chip. If all this sounds familiar then you are not mistaken as it is very similar to the recent Pioneer 4 You IPV V3-Mini kit.

In fact the chipset seems to be the same, the main functions and even the pod atomiser are pretty much the same too.

But getting down to basics the kit comprises of the VKsma mod plus a choice of a rebuildable atomiser or a disposable pod atomiser.

The main feature of this – like the IPV version is the fact this is a squonker which automatically sends e-liquid to the atomiser for you. No bottle squeezing or dripping. I think a kind of temperature control system senses when more e-liquid is required and the YiHi ESS (Electronic Spray Squonk) driver system automatically sends liquid to the atty.

Your e-liquid lives in the bottom tank – which you remove to refill.

As mentioned above you can choose from a kit with the single coil SMI RDA or with the SMA ADA which is more of a disposable pod. The ADA comes in 1ohm or 0.3ohm versions.

If you use the RDA atomiser then the device has a temperature control (DIY) user mode.

If using the ADA (Auto Dripping Atomiser) pod the device will offer different power options:

• 0.3ohm (Ni-Mn Alloy) – choice of 10-15W (P1) or 20-25W (P2)
• 1ohm (SS316) – choice of 5-6W (P1) or 10-12W (P2)

Inside the device is a 1400mAh internal battery which should output between 5 and 25W.

There is a 0.69in OLED screen and the required adjustment buttons.

Here is an introduction video from the VSticking YouTube channel.

There are 7 colours to choose from – Zigzag Silver, Coral Silver, Carbon Gunmetal, Diamond Gunmetal, Skull Black, Flame Black, Leather Black and Suede Black.

Kit Includes

There are two kit versions available – either with a pod atomiser or a RDA atomiser…

Pod Atomiser Kit

• VSticking VKsma Mod
• VSticking SMA ADA atomiser pod
• USB Cable
• User manual

RDA Atomiser Kit

• VSticking VKsma Mod
• VSticking SMA RDA atomiser
• SMA ADA Atomiser pod
• USB Cable
• User manual

VSticking VKsma Mod Specs

• Size: 47.5x79mm
• Output: 5-25W (Depending on atomiser installed)
• Battery: 1400mAh (internal)
• Power modes: Auto Mode (0.3ohm coil = 10-15W or 20-25W, 1ohm coil = 5-6W or 10-12W), DIY Mode (TC)
• Temperature control range: 180-260°C / 356-500°F
• Display: 0.69in OLED
• E-liquid container capacity: 3ml (standard) / 2ml (TPD)
• ESS auto bottom feeding squonk system
• Intelligent temperature control
• YiHi SX635C Chipset
• Anti Burning, No leaking, No spilling

VSticking SMI RDA Specs

• Size: 15.5×33.5mm
• Single coil rebuildable deck
• Stainless Steel and PEI Construction

VSticking SMA ADA Specs

• Size: 14×28.1mm
• Comes with 0.3ohm and 1ohm coils
• Adjustable airflow

What do you think of the Vsticking VKsma Kit? Let me know in the comments below!