The Wotofo MDura Pro Kit is a new rugged feature packed kit which also uses the popular “NexMESH” technology.
More Details On The Wotofo MDura Pro Kit…
I will mainly focus on the MDura Pro mod as the tank has already been reviewed by us…
The mod has a rugged IP67 rating which means it is water resistant (30 mins in water up to 1M deep) and is shockproof and dust resistant too.
You will need 2×18650 batteries which are not supplied and a USB Type C port is provided for charging at a 2A charge rate.
A stunning 1.2in colour TFT screen is located on the front of the mod and there are 6 colour themes to choose from.
The NexMESH Pro tank is a bit more complicated depending on the area this kit is marketed to.
For instance for the worldwide market there are 4.5ml, 6ml, 3.5ml and 5ml tank glass options. For TPD regulated areas (not including the UK) there are 3.5ml, 5ml, 2ml and 4ml tank options. However for the UK market there are just the 2ml straight tube and 4ml bubble glass.
The tank is compatible with the H NexMESH Pro coil range and the H15 mesh / parallel and H12 Clapton mesh coils are included in the kit.
There is also an option of a H17 rebuildable deck if you want to do the whole DIY coil thing.
Filling is taken care of with a slide top fill cap.
There are 5 colours to choose from: King Kong Black, King Kong Blue, Retro Red, King Kong Orange and King Kong Red.
- Wotofo MDura Pro mod
- NexMESH Pro Sub Ohm tank
- USB Type C Cable
- H15 Mesh 0.15ohm coil (installed)
- H12 Clapton mesh coil (non UK kit only)
- Spare H15 Mesh 0.15ohm coil (UK Edition Only)
- Accessory bag
- Spare glass
- User manual
Wotofo MDura Pro Mod Specs
- Size: 47.4×88.1×33.1mm
- Battery: 2×18650 (not included)
- Display: 1.2in colour TFT screen – 6 screen theme colours
- Output: 5-230W (VW) / 10-230W (TC) (0.7-8V)
- User modes: VW (Standard, Power and Power+), TCR (Ni, Ti, SS)
- Type C USB charging – 2A charge rate
- Temperature control limits: 200-600°F / 100-315°C
- Resistance range: not specified
- IP67 Waterproof, dustproof, shockproof
- Compatible with tanks of 30mm and lower diameter
- NexCHIP chipset
Wotofo NexMESH Pro Tank Specs
- Size: 24×42.85mm (standard edition) / 24×40.85mm (TPD & UK edition) / (without drip tip and 510 pin)
- Capacity: 4.5ml (standard) / 6ml (bubble glass for single coil) / 3.5ml (straight glass) / 5ml (bubble glass for dual coil) / 2ml (TPD) / 4ml (TPD bubble glass)
- Coil: H Coil range
- H17 rebuildable coil deck available separately
- Slide top fill cap
- Bottom adjustable airflow
I love the look of this kit and for clumsy gits like me it should last a while! Plus the mod has plenty of features to keep most vapers happy!
Let me know what you think of the Wotofo MDura Pro Kit in the comments below!