The Wotofo Profile PS Dual Mesh RDA is another design collaboration between Wotofo and Mr JustRight1.

profile ps viewsThe original Profile RDA was a huge step forward in rebuildable mesh decks and this has been followed with an RTA, RDTA and Squonk mod!

More Details On The Wotofo Profile PS Dual Mesh RDA…

This version has a different build deck with more user options but still keeps the original Profile functions.

profile ps components

Worldwide Shipping – Save 10% With Code ECC

The reason the Profile RDA caused such a stir was because of the spring loaded cotton clamp which kept the cotton in contact with the mesh for less risk of horrible dry hits.profile ps deck

This time the deck is for dual mesh coils and therefore you have 2 of the cotton clamps going to work.

Another big change is the fact you can select a Series or Parallel coil build configuration (hence the “PS” in the name). The benefits are as follows:profile ps build options

A Parallel deck is usually the standard dual coil configuration and the resistance of the coil is halved – i.e. 2x 0.3ohm coils would have a total resistance of 0.15ohm on a parallel deck. This can be an issue as you may have a restriction on the lowest resistance your mod will fire – also this can put more strain on the batteries.

However with a Series configuration the resistance doubles – so 2×0.3ohm coils would give a total resistance of 0.6ohm which is less likely to cause mod issues.

We tell you more about the effects of resistance in our Guide

profile ps conversion

The conversion between the two configurations involves removing the 510 pin and adding a converter pin.

Also in addition to the standard solid 510 pins in the kit you get hollow BF pins for use on a Squonk mod. A 3ml Juice well capacity should also keep your cotton saturated.profile ps squonk

The Mesh strips used on the original Profile RDA are also compatible plus the new Wotofo Mesh A1 0.3ohm of which you get 2 in the kit plus the cotton strips.profile ps mesh

A side honeycomb airflow inlet which is adjustable directs the incoming airflow over both of the mesh coils.profile ps airflow

There are 6 colours to choose from: Black, Stainless Steel, Gunmetal, Blue, Gold and Rainbow.
profile ps dual rda banner

Kit Includes

  • Wotofo Profile PS Dual Mesh RDA
  • Parallel Solid 510 pin (installed)
  • 0.3ohm mesh x2
  • 6mm thick cotton strip x2
  • Coil bending tool
  • Screwdriver
  • Allen key
  • accessory bag
  • User manual

profile ps contents

Wotofo Profile PS Dual Mesh RDA Specs

  • Size: 28.5×35.5mm
  • Dual mesh coil build deck
  • Spring loaded cotton supports
  • Parallel or series builds
  • Solid 510 pin and BF hollow squonk 510 pin included
  • Juice well capacity: 3ml
  • Adjustable side airflow
  • Stainless steel body
  • 810 drip tip
  • Compatible with original Profile mesh strips

profile ps specsFrom a safety point of view the addition of a Series configuration should help prevent builds which are too low in resistance. Will this affect the vape quality though?

Anyway let me know what you think of the Wotofo Profile PS Dual Mesh RDA in the comments below!

My name is Michelle - I am 45 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again a few years ago and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of June 2019 and that is all thanks to vaping! 20mg Nicotine Salts are my hero! Oh and I am partial to a nice pod mod!

LEAVE A REPLY

Please enter your comment!
Please enter your name here