This time you get adjustable airflow which you need to remove the magnetic front cover to access. Using the supplied screwdriver turn the screw to increase or restrict the incoming airflow.
The internal battery capacity is 1200mAh same as the original Pal AIO and the power output at 3.2-4.2V is also the same.
You can refill this with your own e-liquid and the liquid and coil are contained in a little tank inside the mod. Very similar arrangement to the Billet Box style design.
The tank has a sliding panel for you to refill and the tank can also be fully removed and replaced.
Included in the kit are the new 1.2ohm and 0.7ohm LQC coil heads. Apparently these have cotton and Wood Pulp as wicking materials. This worked well in the Horizon Falcon coils. You can replace the coil heads on their own without having to dispose of the tank.
The Pal One Pro is slightly thinner and shorter than the original version and that was pretty tiny so this is very pocket friendly!
There is so far only a Black version available.
- Artery Pal One Pro device
- 1x spare glass
- Extra coil
- USB Cable
- User manual
Artery Pal One Pro Specs
- Size: 87x47x18.5mm (including drip tip)
- Battery: 1200mAh Internal
- Output: 3.2-4.2V
- E-liquid capacity: 2ml (EU) / 3ml (Standard)
- Adjustable airflow
- Coils: LQC
- Removable tank section with sliding cover refill
The addition of adjustable airflow could be exactly what was needed as Laura-ann found the airflow to be not quite right during her review of the original Pal AIO.
Is the nifty little Artery Pal One Pro something you fancy for out and about? Let me know in the comments below!