This time I’m taking a look at a kit by Innokin – the recently released Gozee Kit. A clean lined lightweight and fresh looking kit, which comes with the Go Z tank as a topper!
Co-designed by Phil Busardo and Dimitris Agrafiotis, the Gozee Kit was recently showcased at Vaper Expo 2022.
Founded in 2011 and located in Shenzhen China, Innokin is considered by many to be the granddaddy of vaping, their extensive back catalogue is impressive!
Innokin have just won 3 International Vaping Awards for the Klypse pod system.
What Can We Expect From the Innokin Gozee Kit?
I’m quite excited by this little kit, it has a brightness and fresh look that I equate with a summer vibe. The lightness of the double injected plastic casing gives a sheen to the device that I have rarely seen with other manufacturer’s products!
With the internal 2100mAh battery running up to 60W and a simplified chipset this kit comes with a small MTL tank called the “Go Z”.
The Gozee Kit is available in 6 beautiful bright and shiny tones – Black, Blue, Yellow, Turquoise, Green and Pink.
This product was sent directly to me by Innokin for the purpose of review!
As always my views and thoughts are my own after a reasonable testing period.
In The Box
- Innokin Gozee box mod
- Innokin Go Z tank
- Z Coil RDL 0.8Ω Range 15-18W (installed)
- Z Coil MTL 1.6Ω Range 1-14W
- Spare Drip tip (standard version only)
- USB Type-C cable
- User manual
- Material: PC & ABS, Stainless steel
- Weight: 73g
- Size (Including tank): 35.7x27x119.4mm
- 2100mAh internal battery
- Screen size: approx 1.5×2.5cm
- Output: 6-60W (1-7.5V)
- User modes: Variable Wattage
- Type C USB charging – 2A charge rate
- Resistance range: 0.2-3.5ohm
Go Z Tank
- Size: approx 45x20mm
- Capacity: 3.5ml (standard) or 2ml (TPD)
- Innokin Z Coils (Zenith)
- Slide top fill
- Adjustable bottom airflow
Design and Build Quality
Innokin sent me the Yellow and Turquoise versions of the kit and this kit comes in 100% recyclable card packaging!
My review is based on the TPD version of the kit. The only differences between the standard and TPD versions is the standard “Go Z tank” is supplied with a removable mouthpiece and has a 3.5ml fill capacity!
This is a mouth to lung (MTL) tank with the option to be used as a restricted direct to lung (RDTL) vape when the airflow is fully open and the right coil!
We tell you what the terms DTL and MTL mean in our Guide To Vape Styles.
Both the Gozee mod and Go Z tank are made of plastic. The whole kit has a modern look with great light feel in the hand, add in the up to 60W power available and this is a very versatile unit.
The Gozee Kit is well manufactured with a great quality of design!
Innokin Gozee Kit – Go Z Tank
My 2ml tank had the 0.8Ω coil for RDL vaping installed with a spare MTL 1.6Ω coil in the box!
Looking carefully at the tank you will note the plastic has a hint of colour to match the device and measures in at approximately 45mm tall with a base diameter of 20mm.
The airflow comprises of 3 medium sized holes that are fully adjustable via the airflow ring!
Dismantling into 3 parts the tank comprises of the body, coil and airflow ring. The TPD Go Z mouthpiece is not removable and is moulded to the tank.
To access the fill port find the Go Z advertising printed on the metal coil guide on the base of the tank, simply push the slide open to reveal the fill port!
Two plug and play coils have been included with the kit
- Z Coil RDL 0.8Ω 15-18W
- Z Coil MTL 1.6Ω 1-14W
The threading screws directly in to the 510 connection on the device thereby making stable connection to the device.
Innokin Gozee Mod
As I said this device is made of bright lightweight double injected plastic and measures in at 70mm or approximately 119mm tall with the tank in place. The 510 connection can take tanks with diameters of up to 25mm without overhang, with the Go Z tank in place the kit weighs 73g.
When in use the battery is responsive with a quick fire!
From the top
The Gozee mod has a stainless steel 510 plate with a gold plated spring loaded connection pin.
Innokin Gozee Mod Body
Entirely moulded in double injection plastic, the device has a soft look to it. Don’t be fooled the plastic is very durable.
On the sides of the device there are a couple of advertising marks that are basically transparent and embedded within the plastic. They are more or less visible depending on what light you’re in!
Innokin Gozee Mod Workface
The device has a colour OLED screen that measures approximately 2.5cm tall and 1.5cm wide. It displays all the normal info you’d expect to see! The screen is clean and bright, even I can see what’s going on without my reading specs lol.
There is a plastic fire button and a rocker adjustment button in the same colour as the mod, contrasting well with the dark workface!
The internal battery is 2100mAh and is charged via the 2A Type C USB port.
Of course both the device and the tank have safety marks printed on them.
How Does the Innokin Gozee Kit Perform?
For this review I will be filling both Go Z tanks with Kwik Vape “Lime Slushie”
I will be using Turquoise mod with the installed 0.8Ω coil for RDL vaping and the Yellow mod with the 1.6Ω coil for MTL.
And later I will bung a different atomiser on to test the higher wattage capability of the device!
Basic Quick Start Guide
Innokin Go Z Tank
- Prime your Z coil with a few drops of e-liquid and push the coil in the tank
- Re screw on the airflow ring
- Push open the fill port and fill with e-liquid
- Let the tank stand for about 3 minutes before firing so the cotton can soak up more e-liquid!
Innokin Gozee Device
I make it a habit now of fully charging any device that has an internal battery, as the factory only partially charges devices before shipment.
The Innokin Gozee is a simple kit to use!
- 3 quick presses of the fire button will turn the Gozee on or off.
- The battery bar on the display shows different colours depending on the current battery charge level.
Red: 20% or less
A full recharge of the battery takes only 60 minutes at 2 amps!
- Adjusting the wattage – hold one of the adjustment buttons for 2s then adjust as normal.
- Press the adjustment buttons together to enter the Menu.
The menu options include screen cut off time and max toot time up to 10s.
- Press the down adjustment button and the fire button to lock and unlock the device.
- Pressing the up adjustment button and the fire button together will show you the battery voltage guide, Ohms of your coil and Puff count.
Perusing the documentation and the Innokin website did not reveal to me any safety features for the device!
However, the device will fire coils of between 0.2-3.5Ω and is adjustable from 6-60W.
Innokin Gozee Kit – In Use
I’m not going to say this is a fabulous must have kit but it does function exactly as it says on the tin. It fits my style of vaping fine, although personally I’ll be using the mod with a different atomiser in the future, not that there is anything wrong with the Go Z tank I just like higher wattages!
With the Go Z airflow open fully, I received a fairly restricted DTL vape with fairly good flavour and good clouds at 15 and 18W.
Reducing the airflow for a MTL draw that is a full on flavour but for me it’s like sucking a watermelon through a straw lol!
Coil & Battery Life
I have been using these kits for almost 2 weeks, the 1.6Ω Z Coil lasted me around 7 days as an MTL coil at 10/12W, the other 0.8Ω Z Coil DTL coil lasted just over 5 days at 17W!
With both coils I have received good flavour and good vapour production.
Using the 2100mah battery as an MTL device it lasted me nearly 2 days! As an RDL device the Gozee battery lasted me approx 4.5 hours.
Of course this depended on how I tooted it!
I have been testing the Gozee Mod with a variety of different 25mm tanks. So far my favourite to use with the mod has been the Freemax Fireluke 3 between 35/50W DTL with a 0.2Ω coil; this of course drops the battery life to around 3.5hrs.
- Quality and Design are very good
- Great battery life
- Comfortable in hand
- Long lasting coils
- Good flavour
- Good Vapour Production
- Very Good retail price
I have no big concerns with this kit!
Final Review Verdict
Although the kit allows for restricted direct to lung and fits my vape style wonderfully, I can’t say the Go Z tank is for me, the flavour however if used as intended the MTL flavour is good!
The Gozee device is great I love the colours I have and the lightness of the device is great I can put it in my shirt pocket and forget it!
Would I recommend the Innokin Gozee Kit?
“Yes”, this kit would be suitable for all levels of vape experience.
Would I buy this kit again due loss or damage?
“Yes” I would replace it.