The Innokin Sensis EZ Kit is an update to the wonderful Sensis kit.
What To Expect From The Innokin Sensis EZ Kit…
You might be forgiven for having some Deja Vu looking at this kit – well you are half right!
The main difference between this and the original Sensis is the pod and 4 new colours!
This time the pod has a flip open top fill port – replacing the awkward bottom fill port of the original.
Also instead of the glass pod used on the original this time the pod is made from PCTG plastic.
The capacity of the pod has increased for non TPD areas from 3.1ml to 4.5ml. Sadly for TPD regulated areas the capacity is still 2ml.
Otherwise this is the same as the original with the same “Fourth Generation Vaping Technology” – i.e. Coil + (priming the coil before each vape), Refresh (refresh the coil to help extend coil life) and F0 (alternating current with changeable frequencies). We tell you more in our article about the Sensis Chip.
The output is variable between 6-40W (1-7.5V) – but the battery capacity is weirdly not mentioned at all on the website? In the instruction manual it states it has a 3000mAh capacity with Type C 1.7A charge rate.
A 510 adaptor is available separately if you want to use another tank on the mod.
You have an airflow adjustment control located on the rear of the mod.
This also uses the Sceptre and S range of coils – but again this is not specified on the website – but I did download the Sensis EZ user manual which says this.
There are 4 new colours to choose from : Midnight Mist, Leather Black, Ultra Pink and Polar White
Kit contents not specified at time of writing
Innokin Sensis EZ Specs
- Size: 120.3×39.5x30mm
- Output: 6-40W / 1-7.5V
- Modes: VW
- Battery: 3000mAh
- Display: Colour screen – size not specified
- Resistance range: 0.2-3.5ohm
- USB Type C port – 1.7A charge rate
- Capacity: 4.5ml (Standard) / 2ml (TPD)
- Adjustable airflow
- Top refill port
- Coils: Sceptre / S coils
- Fourth generation vaping technology – F0 Mode, Refresh, Coil +
- 510 thread adaptor available separately
So more of the same with a few tweaks to the pod this looks like! Wish there was a bit more info on the Innokin website as there are some details missing!
Let me know what you think of the Innokin Sensis EZ Kit in the comments below!