The Steam Crave Mini Robot Combo Kit looks to be quite small and delicate compared to what this brand usually create!
More Details On The Steam Crave Mini Robot Combo Kit…
This kit is designed for MTL (Mouth To Lung) vapers which has an emphasis on a tighter more precision airflow and lower power.
We tell you more about the term MTL in our Guide To Vape Styles.
The kit consists of the Mini Robot Mod and the Mini Robot RTA – you can also buy each component separately and as they both have a standard 510 connection you can mix and match with other vape devices.
To power the mod you will need a single 18650 battery which is not included and there are 3 output options – 3.5V, 3.8V and 4.2V.
This does have a chip control so it is a regulated device and the chip also provides plenty of user protections whilst also being waterproof.
A fire button is provided for turning on and off, fire activation and selection of power modes.
Inside the fire button is an LED indicator which displays any fault conditions – I am not sure if this also displays the battery capacity remaining?
The RTA has a single coil build deck with a cut-out to help align the coil correctly.
The airflow is adjustable using removable airflow pins – there are 4 different diameters included in the kit.
To refill screw off the top cap to reveal the 4 refill ports.
There are 2 colours to choose from: Stainless Steel and Black.
You can also buy the RTA and mod individually.
- Steam Crave Mini Robot mod
- Mini Robot RTA
- Spare Silicone Pad and screws
- 2x 1.2mm airflow pin (installed)
- 2x 0.8mm airflow pin
- 2x 1.6mm airflow pin
- Blind air pin
- 3ml bubble glass
- 2ml glass
- Spare 510 drip tip
- 2x 0.45ohm SS316L coils
- Allen key
- User manual
Steam Crave Mini Robot Mod Specs
- Size: 86.1x23mm
- Battery: 1×18650 (not included)
- Display: LED indicator
- Output: 3.5V, 3.8V or 4.2V
- Resistance range: 0.35-3ohm
- Material: Stainless Steel
- User modes: VV – 3 power settings
- Type C USB charging – 2A charge rate
- SC waterproofed chipset
Steam Crave Mini Robot RTA Specs
- Size: 23×41.35mm (2ml version) / 27×41.35 (3ml version)
- Capacity: 3ml (standard version) / 2ml (TPD)
- Single coil build deck
- Cut-outs to align coil using jig
- Replaceable airflow pins in 4 different sizes
- Top refill
- 510 drip tip
This is very cute and just seems too tiny to be wearing the Steam Crave logo!
Let me know what you think of the Steam Crave Mini Robot Combo Kit in the comments below!