The ThunderHead Creations Artemis RDTA Special Edition appears to be an update to the Artemis V.15 RDTA?
What To Expect From The ThunderHead Creations Artemis RDTA Special Edition?
With the Artemis V1.5 the steel wicking system was abandoned. However for the Special Edition (SE) this has re-appeared!
As this is an RDTA this is a hybrid of an RDA with a deck plus a tank chamber below to feed the deck.
In order to transfer the e-liquid from the tank chamber to the deck section 4 steel wick ropes are used. Once the e-liquid arrives at the deck the coils are wicked with standard cotton as usual.
The deck is designed for a single coil build with 1 screw to tighten both the coil leg clamps at once.
This has a top airflow system which is separate from the liquid chamber so should be less chance of leaking.
The airflow enters through 2 sets of honeycomb air inlets – which I think are adjustable but this is not confirmed on the THC website?
This airflow directly hits both sides of the coil which should create great flavour.
A metal shield in the pattern of honeycomb is provided to help protect the glass section from damage.
This will hold up to 4.5ml of your own e-liquid and you can fill by either removing the top cap and accessing the large fill port on the deck or if you are a Squonker a hollow bottom feed 510 pin is included in the kit.
As the name suggests this is a limited edition to only 1666 units worldwide so you had better get one ordered quick!
There are 3 colours to choose from: Matt Black, Stainless Steel and Matt Gunmetal.
- ThunderHead Creations Artemis RDTA Special Edition
- Spare glass
- Hexagon screw
- Slot screw
- BF Hollow 510 squonk pin
- Coil leg trim tool
- Spare ceramic insert
- 2x spare spring
- 4 core Clapton fused coil x2
- Spare O-rings
- Accessory bag
- User Manual
ThunderHead Creations Artemis RDTA Special Edition Specs
- Size: 24x50mm
- Capacity: 4.5ml
- 810 drip tip
- Single screw, single coil build deck
- Side fill – compatible with bottom fill Squonk mod using BF 510 pin (included)
- Material: Stainless Steel
- Wide slot fill port
- 26 hole honeycomb airflow
- 4x Germany Wicking Steel chamber wicking
I think this looks stunning, not only pretty but practical too and if you can get the flavour of an RDA with the convenience of a RTA it has to be a good thing!
Let me know your first impressions of the ThunderHead Creations Artemis RDTA Special Edition in the comments below!