The Vandy Vape Berserker V3 MTL RTA is the latest in a long long line of Berserker atomisers! This is also a collaboration with Alex from Vapers MD as with the previous versions.
Vandy Vape of course have a huge catalogue of amazing vape gear including the wonderful Berserker range, the Pulse range and the popular Kylin range too.
What To Expect From The Vandy Vape Berserker V3 MTL RTA?
The Berserker atomisers have long been fan favourites for MTL vapers.
MTL (Mouth To Lung) is a style of vaping popular with ex-smokers which has a tight airflow and uses higher nicotine strength / Nic Salt and PG e-liquids.
We tell you all about the above terms in these guides…
- MTL V DTL – A Guide To Vape Styles
- VG and PG in E-liquid – all you need to know
- Beginners guide to E-liquid
- Nic Salt E-liquid
As the name “RTA” suggests this is rebuildable and you install your own coil onto the single coil deck. You even get 2 coils included in the kit to get you started.
The deck looks very similar to previous versions with 2 clamp posts and an airflow outlet located beneath the coil.
The air enters through the bottom located airflow inlets, travels through the airflow pipe located in the centre and then to the outlet under the coil.
You can adjust the tightness of the airflow by replacing the airflow pipe, you get 3 pipes in the kit with 0.8mm, 1.4mm or 2mm inlet diameter holes. The 1.2mm pipe is already installed.
Plus you don’t need to disassemble the coil to replace the airflow pipe either!
The capacity varies according to which kit you get. In TPD regulated areas you get a 2ml version which only has the small glass included. For non TPD areas you get the 2ml glass plus the extended glass which increases the capacity to 6ml!
A simple screw off top cap gives access to the fill port and you even get 3 different drip tips to suit the style you prefer.
There are 5 colours to choose from: Matte Black, Stainless Steel, Gun Metal, Frosted Grey and Gold.
Kit Includes
- Vandy Vape Berserker V3 MTL RTA
- Spare Glass (non TPD version only)
- 2x PEI tube ( 1 in TPD version)
- 2x spare drip tip
- 4x airflow pipe (1.2mm installed)
- 2x super fine MTL Fused Clapton Coils 0.74ohm
- Accessory bag
- User Manual
Vandy Vape Berserker V3 MTL RTA Specs
- Size: 24×31.5mm (short tube 2ml) / 24×43.5mm (long tube 6ml)
- Capacity: 6ml (standard) / 2ml (TPD)
- 3 MTL drip tips included
- Single coil build deck
- Top screw cap refill
- 4 airflow inserts – can replace without dismantling deck
So the Berserker has a new generation! I hope it performs as well as its ancestors!
Let me know what you think of the Vandy Vape Berserker V3 MTL RTA in the comments below!
Can someone help and tell me how can I replace this Berserker V3 2ml tank with some other tank (by other or same vaping companies) how to will clear see how much I have juice in the rank, because this one for 2ml is to small to see amount of liquid in B3, but other replaceable 6ml tanks are to big for me, especially when I use a longest drip tip which is the best drip tip for me?
Some solutions for this, please, I need a little bigger glass tank (than this in packaging – 2ml) by 2 to 3ml higher, which can be stand properly with O-rings on this RTA ATY?
Can I put replaceable glass tank from Innokin ARES D24 RTA MTL ATY, which is a bit smaller tank than this in Berserker V3 packaging by 6ml,in princip when anyone put this bigger tank on Berserker V3 they can fill up to the 7ml of liquid, which is insane for MTL vaping…
I buy this RTA MTL ATY (black mate color) which us perfect combination with my new MOD (Eleaf iStick Power 2 MOD) in same color (black mate). But I wanna ask some of experienced vapers or reviewers, as well as long-term vapers, due to the size of my MOD, as well as the size of the additional glass and PEI tank in the package of Berserker V3, can I found some bigger, even for 1ml tank for this Berserker V3 from some another RTA atomizers, ehich have 24mm diameter, because the larger tank which is also coming in the packaging in two variations is too much bigger and I just need some more bigger tank than this on Berserker V3 which can fill with 2ml of liquid (e-juice)? Can I found or make somewhere another bigger tank (approximately 3ml to 4ml total liquid in the atomizer when it’s full assembled) which will be full compatible with Berserker V3 RTA eith O-rings???
Any suggestions, anyone???
Thank’s a lot and greetings from the Serbia…
Hi Chrisn, if you watch this YouTube review it will explain why:
https://www.youtube.com/watch?v=FIgvxqNZN_Y&ab_channel=VapingWithVic
He mentions that a large amount of cotton is needed to prevent flooding.
Hello there,I filled the v3 today from the top of the tank,the juice came out from the air holes at the bottom,have you any comment on why this has happened?Thanks.
Yea, close them.
Not enough cotton pushed down into cotton wells…