The Pico Squeeze 2 & Coral 2 By Eleaf Previewed
The original Pico Squeeze was an unregulated squonk mod – you could not adjust the output etc. However the Squeeze 2 has adjustable wattage, bypass and temperature control modes all displayed on the 0.49in screen!
The mod can output up to 100W using a single 21700 battery – you can also use a 18650 battery with the supplied adaptor however the maximum output will be lower.
Behind the 8ml squonk bottle is a customisable LED light too just to bling things up a bit!
Unlike some of the Early Pico models the Squeeze 2 can accommodate tanks up to 26mm diameter without overhang.
The kit version includes the Eleaf Coral 2 RDA.
This is a single coil RDA which comes with a squonk 510 pin already installed. You also get a solid 510 pin so you can use this as a dripper on a different mod.
The Coral 2 has a side airflow inlet which is adjustable.
You get 2x Clapton coils in the kit and even some cotton – so all you need apart from e-liquid to get you started!
There are 5 colours available – Purple, Dazzling, Red, Black and Silver.
- Eleaf Pico Squeeze 2 mod
- Eleaf Coral 2 RDA
- 2x Clapton 0.2ohm coils
- 18650 battery adaptor
- QC USB cable
- Spare parts
- User manuals
- Avatar AVB 21700 (optional)
Eleaf Pico Squeeze 2 Mod Specs
- Size: 56x28x78mm
- Output: 100W max
- 7 colour LED
- Squonk bottle capacity: 8ml
- Output voltage: 0.5-9V
- Resistance range: 0.05-3ohm (VW/Bypass) 0.05-1.5ohm (TC)
- Battery: 1×18650 or 21700 (not included)
- Display: 0.49in screen
- Chipset: Avatar
- Compatible with tanks up to 26mm diameter without overhang
- Firmware upgradeable
Eleaf Coral 2 RDA Specs
- Size: 24x32mm (decorative ring takes the diameter to 26mm)
- Adjustable airflow
- Squonk or solid 510 pin compatible
- Single coil deck
- 810 drip tip
Wow this looks wonderful! After so long of there only being mechanical squonk mods on the market we have some lovely regulated ones to choose from now!
Have you got the Eleaf Pico Squeeze 2 kit on pre-order? Let me know your thoughts in the comments below!