voopoo drag mini kit preview

The Drag Mini Kit By Voopoo Previewed

The Voopoo Drag Mini Kit includes the mini internal battery version of the Voopoo Drag mod. Also just released is the new Drag 2 which we reviewed here.

Check Out The Full Voopoo Drag Mini Review Here

drag mini poster

WorldWide Shipping – Save 10% With Code ECC

As you can see below the picture of the Drag mod family the Mini is a lot smaller than the original Drag.
voopoo drag family

The Mini has an internal battery of 4400mAh which is pretty much equivalent to dual 18650 batteries and the maximum output is 117W.drag mini components

Here is a video posted on the Voopoo website introducing the Drag Mini kit.

A new version of the GENE chip the “GENE FIT” is installed on the Drag 2 and Drag Mini. This boasts the same quick firing plus the chip is sealed against Dust, Fire and liquid damage.gene fit drag mini

The GENE FIT chip has a new “FIT” mode which from what I can make out gives you presets for selection when using the UForce tanks and prevents the coils burning out. A brief intro to this chip is below.

Drag2 & Drag mini are here.💨

FIT more than you have ever expected–#Drag2 & #Dragmini👉FIT your taste—Specular finishing💨👉FIT in travels—1/4 lighter than DRAG 1💨👉FIT your needs–5.New UFORCE T2 tank💨👉7.FIT your security—Safer GENE.Fit inside💨Spark your life.⚡#VOOPOO #Drag2 #Dragmini #Drag #GeneFit #Gene #new

Posted by VOOPOO on Tuesday, October 16, 2018

The full kit version includes the Voopoo UForce T2 tank – which is compatible with all the original UForce coils plus the P2 and N2 Single Mesh coils.t2 tank drag mini

However the P2 coil will not fit in the TPD (EU 2ml capacity) UForce T2 version.

uforce t2 coil glass optionsThere are 8 resin plate colours to choose from – Atrovirens, Rhodonite, Coral,  Prussian Blue, Lava, Prussian, Purple and Lime.
drag mini colours

Kit Includes

  • Voopoo Drag Mini mod
  • Voopoo UForce T2 tank
  • UForce P2 and N1 coils
  • Spare glass
  • O-rings
  • USB cable
  • User manual

drag mini kit contents

Voopoo Drag Mini Mod Specs

  • Size: 81.5×48.5×25.5mm
  • Battery: 4400mAh Internal
  • Material: Zinc Alloy and Resin
  • Output: 117W max
  • Resistance range: 0.05-5ohm
  • Temperature range: 200-600°F / 100-315°C
  • Firmware upgradeable
  • GENE FIT chipset
  • Chip sealed against fire, dust and liquid
  • Centre mounted 510 connection

drag mini mod specs

Voopoo UForce T2 Tank Specs

  • Size: 28×54.4mm
  • Capacity: 5ml (Standard) / 2ml (EU) (other glass options up to 8ml)
  • Coils: UForce coils
  • Sliding top fill cap
  • Bottom adjustable airflow

drag mini tank specsI like this as it is even smaller than the Drag 2.

The maximum output is slightly low when you consider Voopoo are boasting that the battery capacity is similar to 2×18650 batteries. When those batteries would easily output 157W like the old drag did.

Will you be dragging yourself to the shops to purchase the Voopoo Drag Mini kit? Let me know what you think in the comments below!

My name is Michelle - I am 43 and an engineer and Technical Author by trade. I started vaping many years ago in the days of Tornado tanks, Ego batteries and Variable Voltage. My journey in vaping began again last year and have started to move up in the shiny shiny gadget department and love vaping! I have finally stopped smoking as of February 2018 and that is all thanks to vaping! I am a huge dog lover and volunteer for my local dog rescue.


  1. Hello Jay,
    I may be able to assist you. The Drag mini can be used to vape in Ni, ss, and Ti for TC vaping. All that is needed is the corresponding coil type and make sure the Drag mini is set to the correct TC mode. Adjust your temperature to your liking and you are good to go.

  2. Can you give any advice on tc vaping on the drag mini, coil choice temp settings wattage settings etc… any help would be nice thanks in advance….


Please enter your comment!
Please enter your name here